Eddy's latest activity
-
Eddy replied to the thread GPU Block Cleaning.That definitely looks like dirt. But at the moment it’s still far from being a serious issue. If you really want to clean it, you could... -
Eddy replied to the thread Wasserkühler für ASUS ProArt GeForce RTX 4080 SUPER 16GB.Nein, für diese Grafikkarte bieten wir keinen Kühler an. Und wir werden auch keine neuen Kühler mehr für die 4XXX Reihe auf den Markt...
-
Eddy replied to the thread Thermal pad material for 9070 XT waterblocks?.The 1 mm pads are 7 W/mK pads (Rise Ultra Soft: 13012), while the 3 mm pads on the back are 3 W/mK pads. However, the 3 mm pads for the...
-
Eddy replied to the thread Arc B580 Wasserblock - 1/4 Metall Gewinde?.Die sind bei dem Kühler aus Acryl. Das ist das selbe Terminal wie bei allen Eisblock Aurora Kühlern die wir für alle Generationen vor...
-
Eddy replied to the thread 12.7/7.6mm TPV metal fittings, too tight.Strange. Yes, the compression rings are hard to screw on, but normally you shouldn’t really need a tool for that. The only explanation I...
-
Eddy replied to the thread 12.7/7.6mm TPV metal fittings, too tight.By “it looks wrong” I meant the picture where the compression ring is sticking out so far. If all of that is 12.7/7.6 mm TPV tubing, it...
-
Eddy replied to the thread Leak testing Alphacool Core 1 Aurora Black.A leak tester is definitely useful. But yes, if the leak tester itself is the problem, it can be very confusing. In general though, it...
-
Eddy replied to the thread ES RTX 5090 REV1 Backplate.These two mosfets only have 2W each. They don’t actually need any cooling at all. They’re not even marked on the heatmap. The only...
-
Eddy replied to the thread ES RTX 5090 REV1 Backplate.(y)Yes. But we have also changed this with the second batch of the first version.
-
4. Cover for the 2 forgotten mosfets (vram vrm phases).
-
Eddy replied to the thread Alphacool HDX Pro - Restriction.I was just in the support office, and they had your email open. I recognized the picture. I think they’re currently figuring out how...
-
Eddy replied to the thread Leak testing Alphacool Core 1 Aurora Black.If it only drops by 0.1 bar and then stays there, I wouldn’t worry about it. We’ve seen this effect many times. Most likely, the air is...
-
Eddy replied to the thread 12.7/7.6mm TPV metal fittings, too tight.What tube are you using exactly? Because that looks wrong.
-
Eddy replied to the thread Leak testing Alphacool Core 1 Aurora Black.What exactly do you mean by “slowly going down”? If it’s only 0.1 bar, that’s fine. If we’re talking about more, then it could be an...
-
Eddy replied to the thread 12.7/7.6mm TPV metal fittings, too tight.Do you have a picture please?
