Eddy's latest activity
-
Eddy replied to the thread question about 12.7/7.6 fittings with 11/8 system.For tubing, the most common size by far is 13/10 mm, followed by 16/10 mm. All other formats are niche options, usually used only for... -
Eddy replied to the thread question about 12.7/7.6 fittings with 11/8 system.Glad to hear you found what you were looking for. However, 11/8 mm is a tubing size that will likely become obsolete in the water...
-
Eddy reacted to BobbyBoyGaming's post in the thread question about 12.7/7.6 fittings with 11/8 system with
Like.
Yeah I checked them. They don't sell the 11/8 fittings only the tube and some plastic quick connectors. Luckily I did find some 11/8... -
Eddy replied to the thread AIO for Thermaltake Core P5.I actually have the P5 myself, but to be honest, I can’t say for sure whether 50 cm will be enough or already too much. I’ve never used...
-
Eddy replied to the thread Adding second radiator to loop (SFF build).https://shop.alphacool.com/en/shop/radiators/prefilled-radiators/ Here you’ll find pre-filled radiators with the matching fittings —...
-
Eddy replied to the thread Need advice about my loop.That setup would work. For the standalone radiator, you’ll of course still need fittings, tubing, and possibly quick-release couplings...
-
Eddy replied to the thread Erster Versuch – was soll ich kaufen?.HardTubes für den Einstieg können schnell überfordern. Die meisten sehen die schicken PCs im Netz, realisieren aber nicht, dass man als...
-
Eddy replied to the thread Alphacool Core RX 9070 XT Mercury with Backplate compatibility.Unfortunately, I can’t answer that. We haven’t had your variant here, and I don’t see that your version is available in our region. We’d...
-
Eddy replied to the thread Non-rotatable fittings adjustment.You can’t use two O-rings on top of each other. Over time, it will start leaking at that spot — very slowly, but over the course of...
-
Eddy replied to the thread Alphacool CPU-Kühler mit bester Kühlleistung.Minimal. Wir reden hier von grob 1-2k was fast schon im Rahmen der Meßungenauigkeit liegt. Meine rein persönliche Meinung: Ich habe...
-
Eddy replied to the thread question about 12.7/7.6 fittings with 11/8 system.That’s not going to work. You might be able to get the tube on, and it may seem like it fits somehow, but in the end, it’s not a...
-
Eddy replied to the thread Does Alphacool plan waterblock for AMD AI PRO R9700?.At the moment, there are no coolers planned for the 9700 Pro. I can’t say yet whether we’ll make any in the future, but even if we do...
-
Eddy replied to the thread AIO for Thermaltake Core P5.The extension tubes we offer won’t help you in this case. They can only extend one tube because the Eisbaer has a quick-release...
-
Eddy replied to the thread Neue AGB-Position, eventuell horizontal - ginge das überhaupt?.Solange im unteren Bereich der Wasserstand hoch genug ist, dass die Pumpe keine Luft abbekommt, ist alles gut. Ich kann jetzt nicht...
-
Eddy replied to the thread Neue AGB-Position, eventuell horizontal - ginge das überhaupt?.Definitiv die stehende Variante also mit Deckel nach oben. Ansonsten müsstest du den AGB zu 100% voll bekommen, sonst wird die Pumpe...