Alphacool Eisbecher Lite 250mm Plexi reservoir

Eddy

Iceman
Staff member
That is a stand alone reservoir without any options for a pump mounting. If you want a reservoir where you can mount a pump, you need an Eisbecher D5 or DDC depends on the pump you have. Wich pump are you like to use?
 

wolfman13

New member
I have no idea , currently i have 2 radiators 360 and 240 and a combo cpu/ pump (Eisbaer LT solo ) ,so i was thinking to add an pump also in the system for a better water flow.
 

Metropolis34

Support
Staff member
You need to add a pump to the system buddy this is by far too much for it. If you add the GPU block i dont think that it can handle the loop.
 

Eddy

Iceman
Staff member
Oh yes.... that a bit too much for the Eisbaer pump.

So you would need something like that:
Pump Top for D5/VPP pumps: https://www.alphacool.com/shop/pump...-g1/4-vpp755/vpp655/tpp644/mcp655-v.3?c=20568

And a pump like this one: https://www.alphacool.com/shop/pump...ol-eispumpe-vpp755-single-edition-v.3?c=20558

But it is very important, that the reservoir is in the case on a higher position than the Pump/pumptop and it is important that the water flows automatically to the pump because the water cooling pumps cannot suck in water.

I would prefere to change the reservoir against something like that: https://www.alphacool.com/shop/ausg...acetal-inkl.-1x-alphacool-eispumpe-vpp755-v.3
 

wolfman13

New member
Ok , thanks alot for the help , maybe i will go for the seperate Pump Top and pump than the combo reservoir. My reservoir is like a few months old, totaly new.
 
Top