Search results

  1. W

    Eheim 1262 inlet?

    That's fine, I'll make that work :)
  2. W

    Eheim 1262 inlet?

    Thank you, I guess I am stuck with using industrial copper fittings with reducers at the waterblock areas.
  3. W

    Eheim 1262 inlet?

    Hi all, I am planning on buying and using an Eheim 1262 pump to watercool my main PC (currently on dual-D5 pumps). I see both the inlet and outlet of that pump are G3/4 and I was wondering if Alphacool does have matching reservoir to plug directly to the pump without having to reduce from 3/4"...
  4. W

    What do you want?

    Thank you!
  5. W

    What do you want?

    At least a SB waterblock? Please? :)
  6. W

    What do you want?

    I desperately want a monoblock or SB waterblock for my newly acquired AsRock X570 Phantom Gaming mITX/TB3. The SB fan buzzing is really annoying.
  7. W

    GPU & CPU loop 280MM

    Generally: A single 280mm radiator won't be able to cool CPU+GPU properly unless you mount high speed fans on it. Push/pull won't help much, it helps at low fan speeds (500-700 RPM) but the higher the fan speeds, the smaller the benefit of push/pull. In my mITX build I went for a 200x200mm...
  8. W

    How much extra pressure for an Eisbaer 420 ?

    What I meant was adding one pump is worse that replacing the weak pump with a stronger one.
  9. W

    How much extra pressure for an Eisbaer 420 ?

    We're not on the same page, so please allow me to detail a bit. Equations are great... in theory. They work very well on paper, but looking at them alone will tell you zilch about what is actually happening in reality. To be honest I didn't even know there was a pump so weak, for example a D5...
  10. W

    How much extra pressure for an Eisbaer 420 ?

    Oh, so sorry, I misread your OP. In that case do not under any circumstance keep that pump. It's too weak for a full loop.
  11. W

    How much extra pressure for an Eisbaer 420 ?

    The maximum flow rate for the VPP755 pump is 350 L/h. 7 L/h is insanely slow, this is 116 ml/minute, it's not possible to have such low flow unless there's a serious blockage somewhere. For any watercooling loop I always recommend getting a flow meter and at least one temperature probe.
  12. W

    HELP- Setup my loop Kit Tornado

    It's the fans, sorry to say, but BeQuiet fans are the last thing I would put on a 60mm thick radiator. From the datasheet, the fans are max 1350 RPM with 1.38mm Hg pressure, which is very, very low for that radiator. I would suggest Noctua NF A14 PWM or if you really want the headroom, the NF...
  13. W

    How much extra pressure for an Eisbaer 420 ?

    1. You don't need another pump, but I usually recommend dual-pump setups for redundancy and peace of mind. 2. Pressure is not a problem unless you have a blockage somewhere. Think of it this way: you could unscrew the reservoir cap while the system is running and liquid will not jump out of...
  14. W

    What do you want?

    Competition LED density: 1.1LEDs/cm vs your 0.8 LEDs/cm - That's 37.5% more LED density. Plus there's no dedicated white LED on your strips - might not matter to others but I use white color on most my builds and once I have used LE strips with dedicated white, I will never ever go back to the...
  15. W

    What do you want?

    I have been using aRGBW from a competitor for a few months, I'd really like to see some competition on the market, currently we have one true king (which is paradoxically not very well known) and several wannabes (which paradoxically are well known). My build has 250+ LEDs and soon I will up...
  16. W

    What do you want?

    Any plans to provide aRGBW LED strips in the future? (aRGBW stands for adressable RGB+White)
  17. W

    Lost in translation?

    I just checked, now it shows the correct title. My assumption is the thread creator first created the thread with the "toilet" word, then corrected it and it somehow didn't update in the sidebar. After replies were posted, the thread title updated in the sidebar accordingly. I have no...
  18. W

    Lost in translation?

    It looks like the side list of thread titles mistranslates "WC" as "Toilet"?
  19. W

    mITX Watercooling system from Alphacool

    E-mail sent! Thank you! LE: one more thing... how much would it cost to make a monoblock for the Asrock X570 Phantom Gaming-ITX/TB3, provided I send you the motherboard?
  20. W

    Starter Kit for Core i9k and Radeon VII ?

    Agreed, the case is not really suitable for CPU+GPU cooling. Why not go for an external radiator solution? I use one and it's awesome.
Top