Search results

  1. B

    Stripped radiator screw threads on new radiator.

    The screw holes in some of my radiators had enough paint in them to make getting the screws started difficult. I cleaned them out with an M3 tap - very simple if you have the tap.
  2. B

    Swapping the pump of Eisbaer Solo LT

    Small Form Factor Forums (https://smallformfactor.net/forum/threads/eisbaer-lt-orientation-on-ryzen.11631/#post-169942).
  3. B

    Swapping the pump of Eisbaer Solo LT

    Someone did a tear-down on SFF Forums. Maybe try searching there. I believe the end result was that it wasn't worthwhile changing the pump.
  4. B

    3970x Cooling Advice

    Will the new CPU cooling plate fit the Eisbaer LT pump? The stock plate is large enough but my understanding is that the cooling fins/pins/structures on the inside are not placed as well as they could be for the latest Ryzen CPUs with more chiplets (like 3950x, for example).
  5. B

    Need instruction for 11569 waterblock (titan xp)

    I have the PDF file and offered to share it with the original poster but haven't heard back.
  6. B

    Eisbaer LT fill port question.

    My last reply was more like a second, but related, question. Perhaps the exact meaning was lost in translation. In my second question, I wanted to know if any air in the pump will naturally rise into a tube attached to the fill port if the fill port is facing upwards. If this is the case, it...
  7. B

    Eiswolf 240 gpx pro pump speed control

    The latest ITX board (Aorus X570-I) can do either DC Voltage or PWM fan speed control according to the manual.
  8. B

    Eisbaer LT fill port question.

    If the fill port is facing straight up with a tube attached, also going straight up, will any air passing thru the pump rise up the fill port and into the tube? I'm trying to decide on the best pump orientation and there are many considerations and limitations to weigh.
  9. B

    Need instruction for 11569 waterblock (titan xp)

    It was still available from somewhere on the Alphacool website when I purchased the same cooler at the end of last year.
  10. B

    Eiswolf 240 gpx pro pump speed control

    Some motherboards have fan headers that can be configured for PWM or DC voltage control via the BIOS. If your motherboard supports this, you could connect it to the fan header, select Voltage control in the BIOS, and then control the pump speed (within it's allowable range) using the BIOS...
  11. B

    Eisbaer 280 AIO in Gigabyte designare -3 pin pump connector.

    Some Gigabyte boards have fan headers that can do either PWM or DC voltage control. If yours has this feature, you should be able to select Voltage mode (instead of PWM) for Fan Control in the BIOS. If your pump supports a range of speeds, you should also be able to set the speed you want in...
  12. B

    Eisbaer LT fill port question.

    Can the fill port also be used as an input or output port? If so, this could help with routing tubes!
  13. B

    I have a copy of the manual for the 11569. Where should I send it?

    I have a copy of the manual for the 11569. Where should I send it?
  14. B

    Need instruction for 11569 waterblock (titan xp)

    I have a PDF version I can send. Doesn't look like I can send it thru this message system. Maybe you could send me a message here with an e-mail address or something?
  15. B

    Swapping the pump of Eisbaer Solo LT

    I wonder if the decal (adhesive aluminum cover with logo) could have been removed without damage by using a little heat to soften the adhesive? If new decals are available, I may be interested. It would be nice to be able to rotate the decal. I understand two of the corners would have to be...
  16. B

    Unable to open fittings on Eisbaer LT120

    If that reply was for me, no, I don't need any parts because I'm using barb fittings instead anyway. I was just letting the other guy know he is not alone. I just had to laugh at the "finger tight" parts of the manual. I have pretty strong fingers and there was no way to removed the fittings...
  17. B

    Eisbaer LT120 Sloshing sound

    Mine had lots of air in it. It seems they don't take the time to completely fill them at the factory.
  18. B

    Unable to open fittings on Eisbaer LT120

    I was also unable to remove the brass fittings without using pliers. Wrap the fittings with a rag to prevent scratching them up too much. The paint is delicate and brass is a fairly soft metal so it scratches easily. If you're a young whippersnapper, it's probably that your hands are too weak...
  19. B

    Eisblock Titan X Pascal problems.

    Hi. My card is an NVIDIA TITAN Xp 900-1G611-2531-000. The PCBs are all the same reference design except for the additional LED header for the Star Wars Collector's Edition lighting. I modified the water block to accommodate this additional LED header, which is right next to the standard LED...
  20. B

    Eisblock Titan X Pascal problems.

    I have an Eisblock GPX Acetal Nvidia Geforce TITAN X Pascal 1080Ti M02 (model #11569) for an Nvidia Titan Xp Star Wars Collector's Edition graphics card. The only difference between this card and the regular Titan Xp is that the Star Wars version has an additional LED header next to the one for...
Top