Search results

He is using an AIO with 420mm radiator and it is an open Benchtable. In compare to a 360mm version inside a closed case, temp differences about 10°C are normal.

The bladder does not have to move. But of course, the flow may not be good for some reason. But you will only find out if you unscrew the radiator base and take a look at it. This is the narrowest point in the entire circuit. You can also open the quick-release fastener and close it again...

You can do this, but the extension set will not be enough. This is actually intended for expanding the AIO CPU. You would need 2 sets, but then the hoses would be extremely long. I would strongly advise you to simply buy 4 connections and the hose separately. Otherwise the installation will be...

Sorry, we have now removed the corresponding Eiswolf from the range. It is no longer manufactured. I can't help you with that. In the best case scenario, you'll find a remaining stock at a reseller. Our article number is: 13494

Ach du meine Güte, das sieht ja wirklich schlimm aus. Ich kann dir nicht mal sagen, was das ist. Farbzusätze verwenden wir nicht und auch ansonsten kann ich mir genau das hier, gar nicht erklären. Wenn die Flüssigkeit in Ordnung ist, kooridiert eine Kupferplatte nicht in dieser Art. Sie...

To be honest, I can't think of anything else. I would play around with the voltage a bit more. The impression is good, but I can't understand why the cooling doesn't work as it should. I can only think of things like an incorrect air flow in the housing and therefore excessively high internal...

150W? Are you sure? That is much more then i see on different sides from different people. They are all below 100W with temperatures between 85 and 95°. Which tool are you using? Please try HWInfo. That is the only real proper tool for meassurings.

We have something similar to the CPU pump combination in your video with the Eisbaer LT Solo. But the pump is significantly weaker and not suitable for a setup like the one you are using. For the connections, we have offset fittings that offer the same function with an L adapter as the more...

Holes in the top make no sense, as the next housing is usually positioned directly above it. What is used for cooling here? Air cooling? Wanting to cool a CPU with over 330W TDP with a 1U air cooler is also very bold. Especially as I am not aware of a single 1U air cooler that is officially...

Very similar. They test on an open system. This is not comparable with a closed housing. You always have higher internal temperatures in the housing and therefore always poorer cooling performance than on an open benchtable. The advantages of AIOs are that they blow the waste heat directly...

Not really in this case. The offset kit only brings ~2°, which won't help you here. There is a fundamental problem here.

Basically, I would always use the Eiszapfen Pro fitting. Due to the fat and conical O-ring, these are the easiest to handle and the safest in terms of tensile force. This is many times higher than with the normal HardTube fittings. But unfortunately they also cost more. I personally am not a...

Leave the nuts off. It is not so much that they are “in the way”, but rather that they can reduce the contact pressure if they are not screwed on tightly enough. They also have no purpose other than to hold the mounting bolts in position to make it easier to mount. But we have already had some...

Mounting on AM5 is identical to AM4 as nothing has changed in the socket holder. Do you have a picture of the imprint of the thermal paste please? Have you checked whether the pump is still running properly? Are you still using the nuts to pre-assemble the retaining screws on the mounting...

@49idei I would like to help, but what is your specific question? It's not entirely clear to me from your text what you would like to know.

Tomorrow, We have never been asked this question before, because temperatures above 60° should never occur in a water circuit for a PC. All water cooling components are only approved up to a maximum of 65°. Anything above that would generally mean overheating. Normal water temperatures are...

Dann liegt bei dir aber ein merkwürdiges Problem vor. Das Mischen der DDC/D5/VPP ist gängig und wird oft gemacht. Probleme gab es dahingehend noch nie. Es ergibt ja auch keinen Sinn, dass die Eisbaer Pumpe stoppt. Am Ende kann man diese so oder so abstellen und das Ganze nur über die Hauptpumpe...

Morgen, Eine Distroplate ersetzt quasi den Ausgleichsbehälter und nimmt auch eine Pumpe auf. Außerdem kann man damit HardTubes orderntlicher verlegen. Wenn du nur den Helix AGB nimmst, brauchst du noch ein Pumpentop samt Pumpe die unterhalb des AGB positioniert werden. Das Wasser muss...

Ja... so beschrieben wird es funktionieren. Wenn das Gegenstück nicht auf dem Schnellverschluss steckt, ist das absolut dicht.

Nein, eigentlich nicht. Trennst du die Schnellverschlüsse sind sie ja immer noch dicht. Oder wie meinst du das jetzt? Wenn du einen Schnellverschluss schließt, fließt das Wasser sofort durch. Wenn du dann am anderen Ende einen Schlauch hast zu einem Eimer, dann geht das. Beim Abziehen des...