Search results

  1. Eddy

    HPE-30 / 360 with Phanteks T30-120 or HPE-45 / 360 with Noctua NF-A12x25 ?

    The hot spot temperatures are more likely to be reduced if the cooler is mounted optimally and the GPU does not have too high tolerances. Whether the water temperature is 1-3° higher or lower hardly plays a role here either. By mounting the cooler correctly.... sometimes you need 2-3 attempts to...
  2. Eddy

    HPE-30 / 360 with Phanteks T30-120 or HPE-45 / 360 with Noctua NF-A12x25 ?

    Don't go too crazy here. The temperature differences won't be huge. In the worst case scenario, we are talking about a 1-3° difference in water temperature. I would simply recommend a radiator and a fan on one side. The constellation with 3 fans on one side and two fans on the other looks pretty...
  3. Eddy

    Issues with my Eiswolf 2 4090 AORUS Master -- cooling performance and condensation/bubbles

    I had already answered you on Reddit. The bubbles don't change the performance, they are too few and too small. They don't play a role here at all. They will also disappear again at some point. But what I didn't say on Reddit was that if you've already topped up with distilled water, there...
  4. Eddy

    HPE-30 / 360 with Phanteks T30-120 or HPE-45 / 360 with Noctua NF-A12x25 ?

    Simple... HPE-30 with the Phanteks fans. I'll just save myself a long and broad explanation here. That would only cause confusion. Put simply, if you are aiming for lower fan speeds, a thin radiator is always better if the fans are positioned on one side. If you want to install Push&Pull, then...
  5. Eddy

    Eiswolf 240gpx pro cleaning

    Hi, can you make a picture of the cooler, so i can see the inside? And a picture of the finns in the middle of the cooler. You can clean the Eiswolf, there are extra liquids for rinsing. What kind of thermal pads did you use? Heat conducting pads must have a certain degree of hardness. Many...
  6. Eddy

    Aio pump question

    No, we do not sell the pump unit separately. This would be more difficult to convert than buying the AIO directly or building a custom loop. Basically, you don't need much for the custom loop. Radiator, hose, reservoir with pump, 6 connections and coolant. As an aid, an ATX bypass connector...
  7. Eddy

    Leaking Radiator

    I don't take it personally. These are legal guidelines that we abide by. I can't speak for Aquatuning, but even with returns from abroad, the customer must first bear the return transport costs up to a certain amount. After checking the goods, they may be refunded if there is actually a fault...
  8. Eddy

    Leaking Radiator

    We are not responsible for Aquatuning's return policy. Basically, however, according to German law, returns are only free of shipping costs above a certain amount, with the exception of returns from abroad. If you wish to cancel your order, please send an email to info@alphacool.com with the...
  9. Eddy

    Core Distro Plate Direction Label confirmation.

    Hi, The arrows do not directly show the direction of flow, but only example configurations. Whether you really connect a CPU to CPU IN or OUT, for example, is completely irrelevant. A distroplate only diverts the water at these connections. It should only be made clear here how the water...
  10. Eddy

    Leaking Radiator

    Then please contact Aquatuning for the return of the radiator or an exchange. I don't know what else you could test. Sorry for the trouble.
  11. Eddy

    Leaking Radiator

    Hi, annoying, sorry about that. Have you done the leak test twice? So unscrewed everything again, screwed everything on, unscrewed all ports again and closed them again? Maybe the leak tool was not screwed on properly. I would also test the leaking tool itself. So screw a stop plug onto the...
  12. Eddy

    Supernova 1260 Erweiterungs Frage

    Die Pumpe wird auch den Radiator noch schaffen, wenn er direkt daneben steht. Aber so viel wird dir das nicht mehr bringen. Bei 30° Raumtemperatur und 37° Wassertemperatur hast du ja bereits ein sehr niedriges Delta von 7°. Selbst wenn du noch eine zweite oder dritte Nova dran hängen würdest...
  13. Eddy

    Wie viele Pumpen werden benötigt

    Vermutlich ja. Ich kann es nicht garantieren, die Umstellung der Pumpen bei allen Produkten kann ich schlecht einsehen. Jede Pumpe muss so eingebaut sein, dass das Wasser von einem Ausgleichsbehälter selbstständig zur Pumpe fließt. Wenn die erste Pumpe an einem Ausgleichsbehälter sitzt und...
  14. Eddy

    Wie viele Pumpen werden benötigt

    Die VPP755 sollte mittlerweile nicht mehr bei uns direkt verfügbar sein, außer man bekommt eine Lagerleiche. Die Apex hat sie ersetzt. Aber im Grunde sind beide Pumpen identisch. Geändert wurde lediglich die Farbe (jetzt in Schwarz), der Stromanschluss ist bei der Apex ein SATA Anschluss (VPP755...
  15. Eddy

    AsRock 7900 XTX OC PhantomGaming Hilfe zur AIO

    Melde dich mal bitte direkt beim Support. Ich vermute die Toleranzen beim PCB und dem Kühler samt Wärmeleitpads drücken den Kühler um 0,1-0,2mm zu weit hoch wodurch der Kontakt auf der GPU nicht optimal ist. Wenn man dann noch andere Pads kauft, die nicht den entsprechenden Härtegrad haben der...
  16. Eddy

    Wie viele Pumpen werden benötigt

    Was ist ein ausreichender Durchfluss für dich? Für manche sind das 50L/h für andere 120L/h? Allgemein sollte hier eine Pumpe reichen. Durchflusswettbewerbe wirst du natürlich damit nicht gewinnen. Falls du doch eine zweite Pumpe einbauen möchtest, sollte sie dann aber tatsächlich baugleich...
  17. Eddy

    undichter CPU-Kühler XPX

    Das ist in der Tat etwas mißverständlich ausgedrückt. Die Aussage bezieht sich eher auf Fehlerbeschreibungen und erste Hilfestellungen. Wenn es aber konkret um eine RMA bzw. Umstausch bzw. so einen Fall geht, ist das quasi schon der zweite Schritt den man gehen muss, und das geht dann nur noch...
  18. Eddy

    Apex CPU Block and Apex Monoblock

    It will be more expensive than the current Core 1 series. I can't tell you exactly how much it will cost at the moment. Somewhere between 130 and 200€.
  19. Eddy

    Asus 4080 Super Pro Art WaKü

    Wir bieten aktuell keinen Kühler für diese Grafikkarte an, sorry.
  20. Eddy

    Apex CPU Block and Apex Monoblock

    Yes, as a manufacturer you can never satisfy your customers. There's always something wrong. Sometimes things arrive too late, sometimes it's sold out.... :cool: Then have fun and good luck with the conversion.
Top