Search results

With this small controller you can`t conect it on your mainboard. For that i would recommend this cable set: https://www.alphacool.com/shop/cable-adapter/rgb-cable/24864/alphacool-digital-rgb-led-y-cable-3-times-with-jst-male-connector-30cm-black?c=20713 The small single adapter is for JST to...

this mounting kit for AM4 works also on the Eisbaer: https://www.alphacool.com/shop/cpu-water-cooler/cpu-mountings/cpu-mountings/21553/alphacool-eisbaer/xpx-halterung-fuer-ryzen-s.-am4?c=20577 And its on stock.

Maybe, not sure. The m2x6 could be to long for a perfect mounting. You need to check it by yourselfe but without any warrenty from our side.

Der Pumpenblock der Eiswolf zeigt bei dieser Einbaurichtung nach unten und macht daher mit deinem Luftkühler keine Probleme. Die Schläuche kannst du ersetzen, aber das Befüllen der Eiswolf 2 wir eine Katastrophe. Das ist alles andere als einfach. Läuft die Pumpe dabei trocken, ist sie defekt. Da...

I dont think you will get enough cooling performance for an i7 12700k with this setup. I would recommend a 240mm radiator.

It can always happen that components like Rams or the GPU are a bit higher or lower. Then the cooler does not sit properly. This is not a mounting error, but a manufacturing problem of the graphics cards. Nvidia has many problems with this, AMD graphics cards actually don't. But you should...

Think he is talking about this small controller: https://www.alphacool.com/shop/modding/lightning-module-led-s/24193/alphacool-aurora-eiscontrol-addressable-rgb-controller-black?c=20713

I honestly can't understand how 3 pumps could break down on you. According to the serial number, it is the V.3 for which we have an RMA rate of a ridiculously low 0.03%. There are actually only the following possibilities why the pump is broken. 1. It was operated without water´over a longer...

How much water is inside the reservoir? Can`t really see it on the pictures and the video. And with which numbers starts the serial number on the pump? First three numbers are enough to know for me.

I'm sorry, I have no idea now either. I don't know much about overclocking with the current generation of AMD cards. Maybe someone else can help here. But generally the temperatures are quite high with the AIO. But that may also be due to the fact that the nickel plating has loosened and thus...

0,5mm is too flat, will not work. We deliver our coolers with good 7W/mk Ultra Soft pads. If you increase the voltage, you also have to allow a higher TDP in addition. However, many cards are limited via the bios. Any adjustment of the voltage won't help.

Where and when did you bought the Eiswolf?

200mm Lüfter gibt es nicht in einheitlichen größen und dicken, daher liefern wir hier keine Schrauben mit. Und wir haben keine Ahnung wie dick die Noctua Lüfter sind.

Super, danke für das Bild. Nach optischer Sichtung bin ich mir eigentlich zu 99% sicher, das nachfolgende Eiswolf 2 AIO passt. Das Layout ist fast identisch mit dem Reference Design. Ein paar Kondensatoren wurden nur weg gelassen bzw. an anderer Stelle positioniert wofür wir aber entsprechende...

I wouldn't get too hung up on the screws and how they help with stability. If there were known issues here, we would figure something out about it. Because nothing is more costly than dealing with RMA processes. And especially RMA processes for graphics cards are extremely expensive. But we are...

Right, you have to remove 1 (thats the fitting, 2 is only the coupling nut) on the Eiswolf cooler and radiator. And you will be not able to use the quick release fitting because this was made specifically for the TPV hoses. However, if you want to use a quick release, there are alternatives...

Ja, das kannst du. Die VPP755 passt bei uns immer und in jede Halterung die für D5 Pumpen vorgesehen sind. Und eigentlich auch bei allen anderen Brands. Die Halterung ist genormt und daran hält sich auch die VPP755. Mir ist nur eine Ausnahme bekannt bei einem Produkt von Watercool, das es aber...

I understand your criticism, but there is also a reason why we don't use these screws on the slot bracket for our coolers. The simple reason is compatibility. This may still work for the Reference Design or Founders Edition, but not for other coolers. Because depending on the card, these screws...

But you have to change all fittings too for this kind of tube. So you have to remove all tubes AND fittings.

Geschmack ist subjektiv. Das sollte man nicht vergessen. Viele fanden grade die vielen O-Ringe schicker als eben nur ein großen O-Ring zu haben, das wirkte auf viele langweilig, weil es fast alle so machen. Da sind wir uns sogar intern nicht einig was besser aussieht, da gibt es zwei Fraktionen...