Search results

If you want to use the active BAckplate with 4 coolers, you will have to use the 5/3mm hoses. Otherwise, there is not enough space to use the G1/4" connections on the cooler. And yes, you will definitely need 2 pumps. 4 GPU coolers are extremely restrictive, especially if you have to use active...

The decision whether to develop and produce a cooler is always based on a market analysis that shows us how large the target group of a cooler could be. In doing so, we can rely on various figures that have always been demonstrably correct. Forums, Reddit and the like unfortunately say...

Yes, we have to check some CAD drawings but i am not a devloper so i dont have the software and the experience to do it. But I'll see if I can get one of the team to check whether another cooler might fit with a little help.

@church Whether the people from the forum here have all bought the cooler, I can't say. Of course, more have been sold than the people who are on the forum here. But the actual minimum quantity from which it makes sense for us to develop a cooler was not reached. The block of the active...

Just to clarify things here. Since so many people here in the forum wanted the Gamerock cooler so badly, contrary to our previous assumption that it might not be worth it, we made the cooler. With it, an active backplate was also planned. The fact is that the Gamerock cooler runs extremely...

Grundlegend brauchst du folgende Teile. Einen CPU Kühler aus der Eisblock XPX Reihe (ist egal welcher). Zumindest für die normalen Sockel wie LGA 1700 oder AM4. Einen Ausgleichsbehälter, am besten mit integrietem Pumpentop für eine VPP655 oder 755 Pumpe, alternativ einen für eine DDC Pumpe...

Then you will see two possibilities for connecting the coolers to the circuit. One via the G1/4" connections on the top and one via 5/3mm hoses. You cannot use the G1/4° connections with your setup. You would need more space between the GPUs. Therefore, you can only use the 5/3mm hoses. For...

Kühlflüssigkeit? Ansonsten passt das.

The active backplates are compatible to the Eiswolf, but only over the G1/4" conectors, not over the MCX adaptor. Over the MCX adaptor you are using a paralell flow and this works only with a stronger pump. A kit only makes limited sense. You don't have to connect it the way you imagine, you can...

It's going to be very tight. In addition, you can only connect the active backplates via the MCX adapter with the 5/3mm hoses. For this to work, however, you will have to generate a high flow rate. This means that with your system you will need two powerful pumps in any case. VPP655/755 or a DDC...

Its a clear colored liquid, so not really bad. But any coloured liquid can clog the fine radiator fins over time. Every coloured fluid contains colour particles, which are very small, but if they start to settle somewhere, they will inevitably clog the radiator fins at some point. However, it is...

Only the color, nothingelse. It only has a bit different electronic that should make the pump a bit more quiet. But i would say, in my feeling, there is no difference that you will really hear.

Yes, there are only 4 screws. Mainly the jetplate and the cooler bottom. For the rest, it should actually be enough if you simply flush it when assembled. Unless you have used pastel colours, then there is usually not much you can do.

Schon vor 5-6 Jahren erfolge eine generelle Umstellung auf 5 bzw. 5,5mm Gewinde bei den Anschlüssen. Die alten Anschlüsse mit längeren Gewinde werden auf sehr viele Produkte nicht mehr passen. Auch auf die HF Schnellverschlüsse nicht mehr.

Laing (Xylem) has chanching a few smaller things on the pump design. All DDC and D5 pumps on the market from all brands are Laing/Xylem pumps. You can always have bad luck with the pumps. As a rule, they run for many years without problems. If your pump broke, it wasn't because of a general...

Die DC-LT 3600 ist ein sehr altes Pumpendesign und eigentlich nur für die Industrie gedacht. Dir ist schon klar, das die richtig laut ist? Ansonsten kannst du die mit der Eisstation verwenden.

A 3080Ti and a 5800X together have around 500W waste of heat. A 280mm radiator will be not enough for that. Only if ylu like to use minimum 2500rpm fans.

Wenn du dich für den Newsletter anmeldets, wirst du direkt mitbekommen wenn wir sie da haben. Außer Produktvorstellungen, verschicken wir eh nichts. Die Unterschiede zwischen Eisbaer und Eisbaer LT kann man im Shop doch eigentlich klar sehen. ;-)

Ok, mein Fehler, das hatte ich falsch verstanden. Ich glaube nicht das du was ändern musst:

Wenn du die Eisbaer neu kaufst, brauchst du kein weiteres Zubehör, auch keine Wärmeleitpaste. Wir legen bei unseren Produkten immer die Subzero mit 16W/mk bei, eine bessere wirst du am Markt kaum finden. Der Kühlerboden deckt die gesamte CPU ab, die ist größer als die CPU selbst. Übertakten mit...