Search results

well no clue whats going on ;/ I think i'll need to test it with another aio because I'm out of ideas atm.

I've tried few versions even on table with tubes on bottom and top and side, with top of case, and with infront, I reseated cooler two times people on overclock forum said that any 360aio should perform better thats why asking you what I can test to be sure.

All done, changed whats needed and did few tests ( stock ) with my oc settings its looking like: but prime95 still overkill the cooling I'm not sure that at 150W cooling should perform better? also changed fans from stock to Noctua NF-A12x25 x3 + one 140mm Alpenföhn Wing Boost 2 and radiator...

Roger that will do when I'll back to home. ;-) I'll post results here.

it's possible to get some information were is the sweet spot for liquid refill amount?

Greate got new pump unit + refill fluid + accesories, now I need guide how to do it :) Super fast delivery lets hope it will help. I can use this guide https://forum.alphacool.com/threads/how-to-use-the-eisbaer-refill-kit.10/ but how I can know its enough liquid? I just should see it in the...

Ok, I sent you e-mail. E-mail is different than this one hope it doesnt matter if yes I can use this one I registered here.

Sure its there any guide how to change block and refill it? Do I need somethink specific as fluid filler?

I show hwinfo results on other forums they all saying its a cooling problem because amps and watts ( IOUT and POUT) and are too low to get so high temps some1 using almost same setup as me and here's his hwinfo in prime95 > By changing cpu unit you mean pump block or processor? I was thinking...

it was like that, I'll make new pic in a 10min it's a pic when I decided to try change fans to increase cooling fans are Noctua AF-12x25 now changed to stock again.

Actually having it open and the radiator is outside the case is that ok for pic or you want pic how it was used before?

pump connector is 3-pin all my mainboard connectors are 4 pin and I did test on " max fan speed " in bios settings and it was for pump also should I hear some noise when pump working on full speed? Or feel under my hand some ticking of pump in full speed?

for example using adapter like ATA into 3-pin ?

yes already switched from PUMP_OPT into Sysfan6_PUMP connector or what do you mean by connecting it directly ?

I can see the RPM of pump so yes I think its running I can try unplug pwm from pump to see what will change.

Hey I'm owner of Eisbear 360 LT for 8 months I was really satisfaied but from a week ago I can't hold temperatures on my cpu. I reapplied thermal paste to new, was using Thermal Grizzly Conductonaut cleaned IHS and copper pump plate and applied Thermal Grizzly Kryonaut. I did test on table to...