Search results

  1. W

    Tpv 12.7 7.6mm tubing and the straight brass fittings

    I tried again today with the warm water and even warm soapy water but the fittings still grab the tubing to the point that when I tighten them it ends up unscrewing the fitting on the other side of the tubing. Are you using the metal fittings or the nylon ones? I think I might need to get the...
  2. W

    Tpv 12.7 7.6mm tubing and the straight brass fittings

    Thank you!
  3. W

    Tpv 12.7 7.6mm tubing and the straight brass fittings

    Hi, When I screw on the compression collar of the fitting it tends to grab and twist the tubing around which is fine for the first component but not when I'm connecting it to another component. Is there a way to do it properly that I am missing out on such as putting a bit of water out oil on...
  4. W

    Modding alphacool quick release latches?

    The link says it uses 11/8 tubing
  5. W

    Order 86017490

    Hi, would I be able to cancel this order before it ships please? I managed to injure my hand pretty badly so I'm unable install this anytime soon + some additional expenses unfortunately. I'll probably reorder in the future tho Cheers Roger
  6. W

    Eiswolf 2 for 3080, what sized radiator?

    https://www.au.aquatuning.com/AtsdCartSave/load/key/9a3592497f2d88d2115c994776819362 Do you think that this will suffice? I was thinking of doing the pump/res to radiator then to GPU the parallel to CPU from GPU
  7. W

    Eiswolf 2 for 3080, what sized radiator?

    Is the eisfach and the 755 available separately though?
  8. W

    Eiswolf 2 for 3080, what sized radiator?

    13304 And also the 90 degree rotating fittings for the 12/7 tpv tubing?
  9. W

    Eiswolf 2 for 3080, what sized radiator?

    Sorry to keep asking questions, what's the availability of a 2 bay res with pump at the moment? Is it really a wait until June July?
  10. W

    Standalone purchasing of future Eiswolf 2 for RTX 3080/90

    Similar, I was hoping to get a 420 or 480mm xt45 instead of a 360, so I could expand the loop later if possible.
  11. W

    Eiswolf 2 for 3080, what sized radiator?

    Oh awesome! I'll just wait for the Eiswolf 2 for the reference 3080 and pair it with a 420mm rad when it becomes available then! I'll rework the loop in the future if the CPU struggles
  12. W

    Eiswolf 2 for 3080, what sized radiator?

    Just to clarify, you would advise against an AIO GPU with a 420mm rad by itself or would it be ok?
  13. W

    Eiswolf 2 for 3080, what sized radiator?

    Would the Eiswolf 2 pump not be enough for a 420mm radiator? I have a Noctua DH15 on the CPU at the moment and it's holding it's own. I was thinking just the Eiswolf with a big radiator down the bottom for now with the CPU on air. Can we convert the Eiswolf 2 block into a standard block if I go...
  14. W

    Eiswolf 2 for 3080, what sized radiator?

    10600k
  15. W

    Eiswolf 2 for 3080, what sized radiator?

    Hi I have a Zotac trinity oc 3080 which is running a bit hot. I was hoping to get a Eiswolf 2 for it with either a 360 or 420mm radiator for it if I decide to add the CPU into the loop. Is there an option for a prefilled 420 or would I have to get the radiator, tubing and quick disconnects...
Top