usernametaken
New member
Good evening everyone,
My cooling setup consists of the following components:
1 x Alphacool NexXxos 360 ST30
1 x Alphacool NexXxos 360 ST45
1 x Eisbecher 250mm / VPP755 Kombo
1 x Eisblock XPX Acryl transparent
1 x Phanteks Glacier 2080 Strix Wasserblock nickel plated copper / acrylic top)
I use Alphacool's Cape Kelvin Catcher clear as cooling fluid. The loop has been built about two weeks ago.
The thing is, after not even 48 hrs of being in the system, the CKC starts turning green-ish / yellow in color and gets pretty muddy.
The CPU and GPU blocks are brand new, never used before.
I cleaned and rinsed the radiators before using them with hot water + dish soap, distilled water and rinsed everything with CKC afterwards.
I repeated each step 4 times. There was no debris / residue coming out of the rads and i rinsed until there was no more foam.
What am i missing here? I've disassembled and cleaned the loop three times now, the CKC still starts turning muddy.
My cooling setup consists of the following components:
1 x Alphacool NexXxos 360 ST30
1 x Alphacool NexXxos 360 ST45
1 x Eisbecher 250mm / VPP755 Kombo
1 x Eisblock XPX Acryl transparent
1 x Phanteks Glacier 2080 Strix Wasserblock nickel plated copper / acrylic top)
I use Alphacool's Cape Kelvin Catcher clear as cooling fluid. The loop has been built about two weeks ago.
The thing is, after not even 48 hrs of being in the system, the CKC starts turning green-ish / yellow in color and gets pretty muddy.
The CPU and GPU blocks are brand new, never used before.
I cleaned and rinsed the radiators before using them with hot water + dish soap, distilled water and rinsed everything with CKC afterwards.
I repeated each step 4 times. There was no debris / residue coming out of the rads and i rinsed until there was no more foam.
What am i missing here? I've disassembled and cleaned the loop three times now, the CKC still starts turning muddy.
