Alphacool NexXxoS XT45 1260mm Inlet/Outlet

pcgamer

New member
Hi, I recently purchased the 1260mm radiator and it has 3x G1/4 ports. Two on one side and one on the other side. What is the layout of this radiator and which ports can I use as inlet and outlet.
 

Attachments

  • PXL_20210526_155710993.jpg
    PXL_20210526_155710993.jpg
    206 KB · Views: 4
  • PXL_20210526_155723802.jpg
    PXL_20210526_155723802.jpg
    197.6 KB · Views: 3

Luckystricker

Official Alphacool Staff
Staff member
Hi @pcgamer

The side where the two g1 / 4 inch connections are for the inlet / outlet. The single one can be used to fill or drain the radiator, depending on the installation situation.

Best Regards
 

pcgamer

New member
Thank you very much! That clears it all. I also found a spec PDF on performance pcs store saying the same thing

"The Alphacool NexXxoS SuperNova Radiator offers two G1/4" threads for IN and OUT. A further G1/4" thread on the back of the radiator serves as a fill port. Alternatively, a temperature sensor or a drain port can also be attached here.""
 
Top