Core Loop Cleaner

KumoriRyuX

New member
For the core loop cleaning solution it says to not run in system for more than 30 mins, does that mean after 30 mins the loop must be drained and if further cleaning is required a new batch of solution must be used? Or does it mean that only run the solution in 30 min intervals until the desired cleaning is reached? Does it matter what temp. the solution is at or just needs to be normal operating temperatures or temperatures under load?
 

Vanzin

Support
Staff member
HI,

as written the cleaning solutions shouldn´t be longer than 30 min in your system, since it will damage your loop if used much longer.
 

Eddy

Iceman
Staff member
Exactly, after rinsing you have to rinse again with distilled water to get all the residues out. Then everything must be emptied and refilled. Please do not use performance water under any circumstances. It contains too many salts, limescale and bacteria.
 
Top