• Dear forum members,

    due to illness of several of our support staff members, we are currently only able to respond to support requests to a limited extent.

    Thank you for your understanding.

    ------------------------------------------------------

    Liebe Forenmitglieder,

    aufgrund von Erkrankungen einiger unserer Supportmitarbeiter können wir zur Zeit leider nur sehr eingeschränkt auf Supportanfragen reagieren.

    Danke für euer Verständnis.

Eiswolf 2 360mm radiator allignment with 011d

Pro4TLZZ

New member
Hi,


I am getting a eiswolf 2 aio for my ftw3 3080. I decided to try my eiswolf 2 for the 3080 Fe in my 011d case.

Unfortunately due to the design of the tube section of the bottom of the radiator the screw holes do not allign with my case.

I can't screw the bottom or top of the radiator. Only 4 screws in the middle.

What are my options?


Below is an image of the issue and comparison with the ftw3 hybrid radiator
 

Thomas_S

Administrator
Staff member
It is very rare that the holes do not match. Do the fans still come on from the side?
 

aclogic

Member
The radiator should fit if you install it with the connections on top. If you look at this video, then you see that have mounted the radiator with connetions on top.
 

Pro4TLZZ

New member
I was able to ziptie the top fan to the case. Ive seen videos for the 011d Evo and it seems to have bigger holes for the screws. I've also ordered that
 

Pro4TLZZ

New member
The radiator should fit if you install it with the connections on top. If you look at this video, then you see that have mounted the radiator with connetions on top.
Unfortunately the top is where my thick artic lf2 rad is mounted. I guess I could move that to the side and see if it fits the other way
 
Top