Mining Cube 300 tube fittings

[Crazyengineer]

Hello.

I ordered Mining Cube 300 from Mindfactory and later found alphacool website. I noticed from the Mining Cube pictures that it has some hoses ready assembled.

Can you recommend me following items to my Mining Cube
- PWM DDC pumps 2pcs (I understood the Mining Cube 300 comes with reservoirs which require 2pcs DDC pumps)
- Controller for PWM DDC pumps
- Controller for PWM Fans
- Hose to CPU block 1pcs (soft tubes)
- Hose from CPU -> GPU Block
- Hose from GPU -> Mining Cube
- AMD AM4 CPU Block 1pcs
- Drain Valve 1pcs

I was thinking to use soft tubes with hose clamp springs for simplicity.

Later on I will add 6pcs water cooled GPU:s to the system. Any considerations I need to take to account when I add these to the loop?
(My mining 5700 cards are **itty ASUS DUAL 5700 EVO, same PCBA as ASUS TUF 5700)

 

[Eddy]

That is the data sheet of this cube. You can see all parts wich are inside: http://www.alphacool.com/download/ENG_1015856_Alphacool_Mining_Cube_300.pdf

- PWM DDC pumps 2pcs (I understood the Mining Cube 300 comes with reservoirs which require 2pcs DDC pumps) - Right, you need 2x DDC pump
- Controller for PWM DDC pumps - Mainly people are using their mainboard for controlling the pumps.
- Controller for PWM Fans - You can also use your mainboard for that. Or any controller you want. We dont offer a normal PWM controller.
- Hose to CPU block 1pcs (soft tubes) - Depends on the sice of tubes you want. I would search for TPV in our shop. That are our Enterprise tubes
- Hose from CPU -> GPU Block
- Hose from GPU -> Mining Cube
- AMD AM4 CPU Block 1pcs - You can choose any Eisblock XPX cooler for AM4. Check out wich one you like, we have a lot. Only differences are the design.
- Drain Valve 1pcs - For example: https://www.alphacool.com/shop/fitt...pfen-2-way-ball-valve-g1/4-deep-black?c=20677