• Dear forum members,

    due to illness of several of our support staff members, we are currently only able to respond to support requests to a limited extent.

    Thank you for your understanding.

    ------------------------------------------------------

    Liebe Forenmitglieder,

    aufgrund von Erkrankungen einiger unserer Supportmitarbeiter können wir zur Zeit leider nur sehr eingeschränkt auf Supportanfragen reagieren.

    Danke für euer Verständnis.

Series or parallel?

jammysland

New member
Hi Guys

I'm just figuring out my first water cooled system. I have an AMD Ryzen 5 5600X and 2 (two) RX 5700 XT 8GB GPUs. I will be using a XT45 360mm radiator and Eisbecher D5 250mm Acetal reservoir with Eispumpe VPP755 V.3. Should I route from the pump to the three cooler (1 x CPU, 2 x GPU) and then direct to the reservoir via a hot and cold loop and t pieces or can I go from one cooler to the next directly?

Thanks for the help in advance!
 

Attachments

  • 1613837128541.png
    1613837128541.png
    1.6 KB · Views: 6

Eddy

Iceman
Staff member
The structure doesn't really matter. I would proceed like this: Reservoir -> CPU -> GPU1 -> GPU2 -> Radiator -> and back to the reservoir.
 
Top