Tubes

Luckystricker

Official Alphacool Staff
Staff member
Hi @Alchuchone

That's fine. The easiest way to completely dismantle the hoses from the DC80 ice station is to actually grab the hose directly above the union nut on the fitting and turn it counterclockwise. But do not loosen the union nut, otherwise the hose will rotate with it and the fitting will remain tightened on the DC80 unit.

Alternatively, you can also get an extension set if one hose is a bit too short.

Best Regards
 

Alchuchone

New member
Hello.

the extension kit is very long, i have the case full of tubes and i had to buy a bigger case to fit them xd.

thank you for your time.
 
Top