Alphacool NexXxoS ST30 Full Copper X-Flow 420mm radiator in a G500A. Possible?

[thejumper]

Hi guys I'm trying to know if the 420mm xflow can fit into a G500A / Evolv X.

I don't have the case yet but I need that model fanless, I already have 5x140mm high quality fans.

The problem is that in the Phanteks documentation clearance for front radiator is 475x142x90mm and this radiator is 477x144x30mm.
Anyone tested this crossflow radiator in a Phanteks case to see if the problem is fixable?

 

[thejumper]

Hi! No one have an idea?

 

[Eddy]

So nobody on our side can tell you that with certainty, because we don't test such things. That's why we provide the dimensions, so that you can measure it yourself or refer to the housing manufacturer's dimensions for comparison. The X-Flow in particular are somewhat longer and are not used nearly as often as normal radiators. Therefore, googling is probably the only thing that helps here. Sorry.
My very personal opinion.... there are manufacturing tolerances for radiators and housings. Looking at the dimensions, I personally wouldn't try an X-Flow in this housing.