BobbyBoyGaming's latest activity
-
BobbyBoyGaming reacted to Eddy's post in the thread Eisbaer 200 tube/fittings repurposing with
Like.
Brute force is the only thing that will help here. It might help to warm up the fittings so the material expands or becomes a bit more... -
BobbyBoyGaming posted the thread Eisbaer 200 tube/fittings repurposing in General Product Questions.Hello, I purchased an Eisbaer 200 a long time ago and I have since been using that radiator with 13/10 tubing and fittings on another...
-
-
BobbyBoyGaming reacted to Eddy's post in the thread question about 12.7/7.6 fittings with 11/8 system with Like.
For tubing, the most common size by far is 13/10 mm, followed by 16/10 mm. All other formats are niche options, usually used only for...
-
You can’t use two O-rings on top of each other. Over time, it will start leaking at that spot — very slowly, but over the course of...
-
BobbyBoyGaming replied to the thread question about 12.7/7.6 fittings with 11/8 system.Which size fittings do you think will take the place of 11/8 for Small Form Factor applications? Will 10/8 also be obsolete soon as...
-
BobbyBoyGaming replied to the thread question about 12.7/7.6 fittings with 11/8 system.Yeah I checked them. They don't sell the 11/8 fittings only the tube and some plastic quick connectors. Luckily I did find some 11/8...
-
BobbyBoyGaming replied to the thread question about 12.7/7.6 fittings with 11/8 system.Is there an Alphacool store staff member that could very quickly test this combination of fitting and tube (and clamp if you have it)...
-
BobbyBoyGaming posted the thread question about 12.7/7.6 fittings with 11/8 system in General Product Questions.Hello, I have a system that uses 11/8 fittings (5/16 inch ID), however, ever since you stopped shipping to America I can no longer find...
-
-
Hello, Is there a way to change the final position of a non rotatable fitting such as this one? If I put an additional o-ring would...
-
-
BobbyBoyGaming replied to the thread What do you want?.Please add ports to both sides of the 20mm HPE radiators. They are thin and it's a tight fit but it greatly improves compatibility with...
-
BobbyBoyGaming reacted to Eddy's post in the thread Waterblock compatibility ASUS Prime 5070 Ti (non-OC) with Like.
Hi, we’ve only tested the OC version, so we don’t know what the PCB of the non-OC version looks like. Because of that, I can’t confirm...
-
BobbyBoyGaming posted the thread Waterblock compatibility ASUS Prime 5070 Ti (non-OC) in General Product Questions.Hello, Do the "ASUS PRIME GeForce RTX 5070 Ti" and the "ASUS PRIME GeForce RTX 5070 Ti OC" have the same PCB? Is the OC water-block...
