Eddy's latest activity
-
Eddy replied to the thread ES RTX 5090 REV1 Backplate.These two mosfets only have 2W each. They don’t actually need any cooling at all. They’re not even marked on the heatmap. The only... -
Eddy replied to the thread ES RTX 5090 REV1 Backplate.(y)Yes. But we have also changed this with the second batch of the first version.
-
4. Cover for the 2 forgotten mosfets (vram vrm phases).
-
Eddy replied to the thread Alphacool HDX Pro - Restriction.I was just in the support office, and they had your email open. I recognized the picture. I think they’re currently figuring out how...
-
Eddy replied to the thread Leak testing Alphacool Core 1 Aurora Black.If it only drops by 0.1 bar and then stays there, I wouldn’t worry about it. We’ve seen this effect many times. Most likely, the air is...
-
Eddy replied to the thread 12.7/7.6mm TPV metal fittings, too tight.What tube are you using exactly? Because that looks wrong.
-
Eddy replied to the thread Leak testing Alphacool Core 1 Aurora Black.What exactly do you mean by “slowly going down”? If it’s only 0.1 bar, that’s fine. If we’re talking about more, then it could be an...
-
Eddy replied to the thread 12.7/7.6mm TPV metal fittings, too tight.Do you have a picture please?
-
Eddy replied to the thread Where to connect?: Alphacool ES flow and temperature sensor "HighFlow" with speedometer signal.You measure the flow rate via the RPM, which is read out through the 3-pin connector. You can plug this into any fan header, whether...
-
Eddy replied to the thread 12.7/7.6mm TPV metal fittings, too tight.Do you mean the fitting itself or the compression ring of the fitting? The fitting itself must, of course, be screwed in fully...
-
Eddy replied to the thread NEU! Core RX 9070 XT GPU-Kühler.Wir haben keine Non XT Variante hier gehabt zum anschauen. Daher steht sie auch nicht auf der Kompatibilitätsliste. Ob der Kühler passt...
-
Eddy replied to the thread Alphacool HDX Pro - Restriction.I really can’t do anything about it. Support will get back to you, but they have a lot of emails to handle. Keep in mind that we’re in a...
-
Eddy replied to the thread Eiswolf 2 AIO Backward Compatibility With RTX5070ti Backplate.In theory, that would be possible. So you want to buy an Eiswolf AIO, remove the cooler, and then attach the cooler for the 5070 Ti...
-
Eddy replied to the thread Status update order 30201665 9070XT Red Devil Block.We sell products worldwide — in Europe, North and South America, parts of Africa, and of course in Asia. The respective distributors are...
-
Eddy replied to the thread FTW3 3080Ti waterblock alternative????.No, no other cooler would fit. We always try to design each cooler so that it will fit as many graphics cards as possible, since it’s...
