Eddy's latest activity
-
Eddy replied to the thread Order 30209250 is delayed and there's been no response from customer support..Посылка не была отправлена, потому что указанный вами адрес не существует или вы ввели адрес, который не имеет смысла. Мы отправили вам... -
Eddy replied to the thread Adapter juggling - Is there a better way?.I’m afraid I can’t really say. I don’t see how you could make that alignment work with other adapters in such a tight space. The only...
-
Eddy replied to the thread Eiswolf 2 AIO 5080 / 5070 ti Compatability.The demand for regular DIY coolers is still so high that we currently don’t have any production capacity available for the new GPU AIOs...
-
Eddy reacted to HerbinhoCGN's post in the thread Neue AGB-Position, eventuell horizontal - ginge das überhaupt? with
Like.
Danke, ich war jetzt verunsichert, da beim absichtlichem Entleeren immer anfangs viel mehr rauskommt. Allerdings nehme ich da auch eher... -
Eddy replied to the thread Neue AGB-Position, eventuell horizontal - ginge das überhaupt?.Schlicht und einfach -> Unterdruck. Wenn man Anschlüsse löst, spritzt das Wasser nicht direkt raus. Je nach Positionierung und Stelle...
-
Eddy replied to the thread Core AM5 Performance Kit - Kühler Ausrichtung / Cooler Orientation.With the Performance Kit, you can position it exactly as shown in the manual. However, in this case and with this kit, a 90° rotated...
-
Eddy replied to the thread question about 12.7/7.6 fittings with 11/8 system.For tubing, the most common size by far is 13/10 mm, followed by 16/10 mm. All other formats are niche options, usually used only for...
-
Eddy replied to the thread question about 12.7/7.6 fittings with 11/8 system.Glad to hear you found what you were looking for. However, 11/8 mm is a tubing size that will likely become obsolete in the water...
-
Eddy reacted to BobbyBoyGaming's post in the thread question about 12.7/7.6 fittings with 11/8 system with Like.
Yeah I checked them. They don't sell the 11/8 fittings only the tube and some plastic quick connectors. Luckily I did find some 11/8...
-
Eddy replied to the thread AIO for Thermaltake Core P5.I actually have the P5 myself, but to be honest, I can’t say for sure whether 50 cm will be enough or already too much. I’ve never used...
-
Eddy replied to the thread Adding second radiator to loop (SFF build).https://shop.alphacool.com/en/shop/radiators/prefilled-radiators/ Here you’ll find pre-filled radiators with the matching fittings —...
-
Eddy replied to the thread Need advice about my loop.That setup would work. For the standalone radiator, you’ll of course still need fittings, tubing, and possibly quick-release couplings...
-
Eddy replied to the thread Erster Versuch – was soll ich kaufen?.HardTubes für den Einstieg können schnell überfordern. Die meisten sehen die schicken PCs im Netz, realisieren aber nicht, dass man als...
-
Eddy replied to the thread Alphacool Core RX 9070 XT Mercury with Backplate compatibility.Unfortunately, I can’t answer that. We haven’t had your variant here, and I don’t see that your version is available in our region. We’d...
-
Eddy replied to the thread Non-rotatable fittings adjustment.You can’t use two O-rings on top of each other. Over time, it will start leaking at that spot — very slowly, but over the course of...