Recent content by twinprime

  1. T

    Gigabyte 2080Ti Waterblock Issues (both has problems)

    Can I get some advise from alphacool what should I do please? Can you ship one out to me quickly? My system is stuck (as pictured, only 1 card in loop...) and I don't know how to move foward. Thank you.
  2. T

    CPU>GPU>Radiator or GPU>CPU>Radiator ?

    You keep missing the point that the question here is which is hotter, and therefore requries more attention. Fact: When both are on decent water blocks, using the same coolant and pump, same loop, the CPU will always be way hotter than the GPU is, even if the GPU consumes more power. Obviously...
  3. T

    CPU>GPU>Radiator or GPU>CPU>Radiator ?

    In the world of cooling, the wattages and theories are mostly useless because it's much quicker to get emperical with this stuff (and more fun to)? The question that was asked was "which generate more heat." I believe they actually mean which actually runs hotter in their setup. Who cares if CPU...
  4. T

    CPU>GPU>Radiator or GPU>CPU>Radiator ?

    When both are on custom water, I seriously doubt GPU generate more heat. In my system the 2080Ti is on a Alphacool waterblock and idle 25C with max load at 37C (30min at 100% GPU load). CPU 3900X idles at around 38C and goes up to 67C during 30min max load. All stock clocks. If you uses a...
  5. T

    Breaking a Hard Tube Loop?

    Hi, I assume the pump is the "GC". Yes it would work but it would depend on the type of fitting you use. I'm using the Thermaltake CPro fitting in which the pipe rest flushed against the fitting and not "insert" into the fitting. So when the outter fitting ring is removed, the pipe (and the...
  6. T

    Gigabyte 2080Ti Waterblock Issues (both has problems)

    Hello, I ordered 2 Alphacool Eisblock Aurora Plexi GPX-N RTX 2080/2080Ti FE (2070 & 2080 Super) for my 2 Gigabyte RTX 2080Ti Windforce 11GB 1. The GPU Block doesn't fit so I had to mod my card a bit (in hindsight I should've modded the waterblock instead) to fit. It is because of this pin...
Top