Rise Flat Reservoir with DDC pump.

[Substructure]

Is the pump stated in the description able to be adjusted as far as pump speed goes? I am able to change settings in AI Suite but it doesnt seem to make an effect. Couple things im gonna try in the BIOS but am I wasting my time? I just dont think it needs to run 100% so I would like to change that. If not then ok, I still like the Rise Flat!! Thanks.

 

[Bluelou]

@Substructure
THe DDC pumps are designed to run always with 12V. It is not recommended to lower the voltage with an adapter. If you want a controlable one, you have to purchase following one: https://shop.alphacool.com/shop/pumpen/ddc/13996-laing-ddc-pumpe-12v-ddc-4.2-pwm?c=1492
This is the only DDC pump which can be controlled by PWM.

 

[Substructure]

@Substructure
THe DDC pumps are designed to run always with 12V. It is not recommended to lower the voltage with an adapter. If you want a controlable one, you have to purchase following one: https://shop.alphacool.com/shop/pumpen/ddc/13996-laing-ddc-pumpe-12v-ddc-4.2-pwm?c=1492
This is the only DDC pump which can be controlled by PWM.

Ok good sir. So if I purchase this pump it will definitely fit my rise flat reservoir? Thank you for the response

 

[astaaa]

It depends on what reservoir you got. If you have an Eisstation solo it should fit. But as I see you got the Rise Flat Reservoir. Unfortunately, the pump does not fit in this reservoir.

 

[kazipa]

You might need to consider other options if managing the pump speed is a priority.

geometry dash world​