Search results

I use Thermal Grizzly's MinusPads to strengthen the AlphaCool in the instructions.

I can also broadly agree with dcox12's statement. If you have experience with liquid metal, there is nothing to say against it. When it comes to the chiplet design and usage, I haven't come across much on the internet. I use the cryosheet on my Merc310. Yes, it is more expensive, but it will...

Ok, sounds like the same mistake as most people here. Apparently, this chiplet design causes the problem that with "normal" thermal pastes (NH-2, MX4, etc.) a "pump out" effect is created, i.e. the paste may become too liquid and run off between the chips.

Hello, Sounds good. Keep an eye on your temperatures and let us know if it stays that way or if there is a “pump out” effect with this thermal paste. On the subject of the TG KryoSheet, if you buy this there is NO material included to protect the capacitors around the GPU. Either you get TG...

Hello, Then you quickly paid €20 including shipping. I have to admit, I can already see the pad from YouTube, “Der8auer” introduced it, as he is also the founder of Thermal Grizzly is. But I didn't remember it to be honest. But as you say, the assembly is a bit inconvenient, but once it's in...

Hello, I took the tip and got TG Kryosheet 25x25. Unfortunately it's a bit expensive (20€ for a pad) and to be honest, the assembly is really not good and very annoying. This is a pad made of graphene and is dry, i.e. it sits very well on the GPU Fits perfectly without sticking out. Now try to...

Hi, what do you mean you are using Thermal Gryzzly Extreme 0.5mm?? You once the minus pads? And if so, where do you want to use it? If you also have problems with the Alphacool water block, you need 1 mm pads and not 0.5 pads anyway. If you want to use them directly on your GPU, I don't want to...

Hello, I already have experience with LM, but in the RX 6000 series and they have a monolytic chip and no chiplet design. I just wanted to ask if anyone has experience with the MCM and whether there is anything else to consider here. But your idea with the cryosheet is good. I read something...

Hi, one question. Can I simply use liquid metal with the RX 7900XT cards or do I have to be careful because of the chiplet design? In other words, no metal is allowed to come between the individual MCMs? Yes, I know it is conductive and I have to use TG Shield from Thermal Grizzly or something...

Hello again, So I now have the following values: When idle with a water temperature of 23 degrees and a flow of 120 L/H GPU Core 25 degrees and 28 degrees HotSpot. When gaming at full load (except memory) 43 degrees on the GPU and HotSpot 68 degrees, the highest value. Here is a picture of...

Hey, i want to ask if there is now a solution for the problem from alphacool or not. I have a XFX RX 7900XT Merc 310 and buught the alphacool waterblock directly after the release. Since that time i replace the waterblock 4 times. Because i have in gaming (GTA v, Division 2 at 1440 p an ultra...