Search results

I'm not sure if you found the answer, but it will not fit only vertically you need a bracket for that, unfortunately for a few mm

https://www.alphacool.com/shop/grafikkarten-wasserkuehler/nvidia-gpu/29103/alphacool-eisblock-aurora-acryl-gpx-n-rtx-3080/3090-gamerock-mit-backplate this is the water black that i and many others users here are using for the Gainward card, at least with 3090 GS / or non you should be fine. Keep...

Yes Thomas ty for the observation but I have

you mean the one that keep the bracket or the backplate itself ? if the backplate then normal till they are tight but not over do it so i don't DMG the screws

In the end i don't know from whom I checked but i saw i zip tie and i just use one since I am using vertical riser stand ite perfect fine, also I'm still checking everything but I don't have any issues so far but is still believe that LR22 chips need the 2 mm pads those are the one I used I...

In 1 you can see i used 2mm pads that are better than 1mm that was originally there in pic 2 i have double side the 1mm that was given with the cooler that have better contact and in pic 3 you can see over roll the contacts they have i will send all those to support as well

Thank you Thomas_S i will try again today and will give my feedback here as well

The LR22 chips was slight pressed but not all of them on both sides

I had few issues the card was running but after 1.30 hours of gaming it would artifact, random crashes and black screams follow up with reboots ,i have install the old cooler and everything is good now on the old one ,the LR22 chips could use a 1.5 or 2mm one i have uses 2mm one but i havent...

Well I hope you will have better experience then me for some reason after installing the water block my system act a bit weird 3090 GS I reinstall the old cooler and test it today for few hours ( the problem I had that after this card was working with the watercooler I got crashers in mid game )...

I have mounted mine few minutes ago ,mine is perfectly fit without any issues Gainward 3090 GS . Well on the seconf look it might need a bigger pad

I hope the Alphacool get a good amount of order, so they will not regret making this cooler and i hope its compatible with the Gainward 3090/3080 series, it might even push it, so we might get the active backplate as well

I'm a gainward owner I will try it and check if we can use it as well thank you eddy and thomas for all the effects

This is what the title of this thread suggest and with research I did yes, in any case you will not be able to find any other company to take gainward card series, so Eddy was our only hope in the end. I found others users with the gainward card and base of their pictures I can say they are the...

GeForce RTX™ 3090 GameRock OC share the same PCB Gainward and Palit are the same company afik this is the Palit layout since I own Gainward Phantom gs 3090 I couldn't find something different. Do you own research and welcome to waiting list

Welcome to the club

Hello Eddy, I'm kinda late on the thread since I thought we will never get a waterblock o_O for Palit 3090/gainward rtx 3090 phantom gs, I had applied also for the sending card program for "gainward rtx 3090 phantom gs" (was denided ) I'm not sure if anyone sent you one so you can take the...

Few days ago I had applied for the "Send it and get one cooler for free " with a 3090 Phantom GS card so they can take measurements for the PCB but unfortunately they replay that they have no intention of making one " I am sorry but we do not have an compatible water block for this GPU in our...