Alphacool Eiswolf 2 pump died

[Cesar]

Hi,

I have this watercooler for a RTX 3090 FTW3 and recently I'm pretty sure that the pump completely died. There are no moving water,no noise, no action,nothing! So I was searching here in the Forum and I found out a possible solution that it would be to replace only the pump. I want to confirm if this possibility would fix my problem.

https://shop.alphacool.com/shop/pumpen/dc-lt/ <<< Which one I could buy it and replace the faulty pump?

 

[Eddy]

The following pump is installed:
https://shop.alphacool.com/en/shop/pumpen/dc-lt/pum-alphacool-dc-lt-2600-ultra-low-noise-ceramic-12v-dc

But I can't explain to you at the moment how you can install them in the Eiswolf. As far as I remember, it's not even that easy.
If you need more detailed information on this, please contact the support team directly: info@alphacool.com

 

[Cesar]

What if I try to replace the Pump Top with a new pump?Is that possible?

 

[astaaa]

Replacing the entire top would be too much trouble. Unfortunately, we do not offer this top as a spare part. If you still in warranty you can contact us so we can solve this issue. Please use the following email adress: info@alphacool.com

 

[Cesar]

More trouble than I already had by completely disassembling ,cleaning and assembling again? It would be fine for me but, from what I can see, there are no possible way to just replace the pump and with the same top, the 3-pin connector would not fit in on that little space that the cable goes...

 

[astaaa]

We do not offer the Eiswolf 2 terminal in this form. What I can offer you is to buy a terminal from the normal ice block and mount it on it: https://shop.alphacool.com/search?sSearch=terminal+eisblock&p=1

However, you will need an external pump for this as this terminal does not have a pump unit.