Hi Im having an issue with keeping temps down below 100, its always been hard to keep below 90 for my 5950 but recently its got worse, so i suspect the pump (even tho its running around 2500), so im just going to replace the block, id like to keep the Radiator tough, can this be done or is it a new AiO?
Can i replace just the CPU block on my Alphacool Eisbaer LT360?
- Thread starter goldman18
- Start date
Hi,
sure, our AIO´s are full modular und you can replace everything. But before that, did you check if your CPU cooler is clogged? Depending on how old the AIO is, bacteria and algae can grow, which wioll clog the copper plate. This can be simply fixed by removing the copper plate, cleaning it with a soft tooth brush and distilled water. Afterwards you have to flush system and refill it.
sure, our AIO´s are full modular und you can replace everything. But before that, did you check if your CPU cooler is clogged? Depending on how old the AIO is, bacteria and algae can grow, which wioll clog the copper plate. This can be simply fixed by removing the copper plate, cleaning it with a soft tooth brush and distilled water. Afterwards you have to flush system and refill it.