Phoenix B_06

knightsilver

New member
8gQS8QN.jpg


Above image is the initial build that is currently sitting in the bedroom closet waiting to be rebuilt. Wife I I just moved cross country in the U.S.A. and starting over and fresh, money has been tight, and rebuilding things as we've been going. We've all had to start over from scratch at some point in our lives, lol :)... Long store short, we shipped my system cross country and the case ended up getting tweaked, so the rebuild is getting done sooner than later.

Current build: Currently Shelved
Asus X58, i7-950, 8GB Ram
EVGA GeForce GTX 980 SC ACX 2.0 165Watts
Samsung EVO 2.5 500GB
Corsair RM850x PSU
Alphacool Eisblock XPX CPU Block (My first Alphacool & Modmymods product)
Corsair iCUE 220T RGB Airflow Tempered Glass Mid-Tower Smart Case — White (Just ordered from Corsair USA)
4 Noctua NF-A12x25 PWM Fans
Noctua NF-P12 Redux Fan

Cooling:
Alphacool Eisblock XPX CPU Block (Already have)
Alphacool Eisball Pump/Reservoir combo
Alphacool NexXxoS V.2 XT45 360 Rad
Alphacool NexXxoS V.2 XT45 120 Rad
Masterkleer tubing PVC 13/10mm (3/8") UV-active blue/clear
Alphacool Eiszapfen 13/10mm compression fitting G1/4 - deep black sixpack
Alphacool Eiswasser Crystal Blue UV-active premixed coolant 1000ml

Lighting


Rebuild AMD Zen:
AsRock X570 ATX
AMD RYZEN 7 3800X 105Watts
Corsair or GSkill 32GB@3600Hz+
WD_BLACK SN750 NVMe SSD M2 "OS Boot"

This will be my 6th system build, a rebuild. Ill be reusing the X58 setup to build the waterloop "also will be my first waterloop" before rebuilding the core components. Do I go through the trouble of doing a universal GPU waterblock for a non-reference-pcb gpu board, or just wait till my next GPU and just buy a eVGA Hydro-Copper GPU to replacing the aging GTX 980?

Thx,
Knight'
 
Last edited:
Top