Adding a CPU block to my Eisbar cooling.

BlackDog600

New member
Hello. I have now a eiswolf wattercooling with 240mm radiator instalierd for my 2080ti. I wanna upgrade my PC and buy a new board and cpu (soc. Intel 1200). I have room for a 120mm radiator in my case so i thought that i can use that. What do you recomend to buy?
 

Metropolis34

Support
Staff member
The 120mm radiator will be not enough to cool the CPU i am affraid. You need more cooling surface/capacity.
 

BlackDog600

New member
The 120mm radiator will be not enough to cool the CPU i am affraid. You need more cooling surface/capacity.
But as i wrote i have a system already with a 240mm radiator, i wanna add a CPU cooler with a 120mm radiator to it. So it would be like a 360mm radiator for both CPU and GPU.

I looked at this https://www.alphacool.com/shop/sets-systeme/eisbaer/26782/alphacool-eisbaer-200-cpu-black?c=20540 but i doint know if i can put this to my existing system (2 pumps in one system).
 
Last edited:

Metropolis34

Support
Staff member
The 240 mm radiator is just enough to cool the graphics card.

I looked at this https://www.alphacool.com/shop/sets-systeme/eisbaer/26782/alphacool-eisbaer-200-cpu-black?c=20540 but i doint know if i can put this to my existing system (2 pumps in one system).
You asked for a 120 mm radiator which would not perform well with those CPU,s. This Eisbaer has got a 45 mm thick radiator and can move at push-pull formation arround 500 W TDP. You can connect both system very easy and two pumps are even better.
 

BlackDog600

New member
Yeah i thonk i will go with this one i mentoined. I make room for that radiator. So my setup would be like CPUcooler-200mm radiator-GPUcooler-240mm radiator-back to cpucooler.
 
Top