Eddy's latest activity
-
Eddy replied to the thread Broken wire on in-line temp/flow sensor.For that, you’ll need to contact support directly. I can’t help you with this in the forum: info@alphacool.com -
Eddy replied to the thread Can the PCB Fan Connector still be used with Alphacool Eisblock Aurora ? (RTX 4090 Suprim).You won’t be able to plug in a connector there anymore. There’s too little space between the acrylic and the header. At least I don’t...
-
Eddy replied to the thread Alphacool Core 6x 4-Pin PWM/DRGB.In what way are they not being read correctly? On each controller, you can only read the RPM of a single fan. Your motherboard header...
-
Eddy replied to the thread Alphacool ES GPU Block falsche Bohrungen.Du hattest eine MSI Ventus, richtig? Falls ja, dann hast du eine Aquatuning einen alten Kühler aus der ersten Batch bekommen. Da lagen...
-
Eddy replied to the thread Ersatzteil Pumpentop mit Eisbecher-Gewinde.Melde dich mal bitte direkt beim Support: info@alphacool.com Ich kann dir dabei hier über das Forum nicht helfen, da wir das Top nicht...
-
Eddy replied to the thread What do you want?.At the moment, there are no plans for us to release additional coolers for the 9070 series. In fact, I wouldn’t expect any new coolers...
-
Eddy replied to the thread Eiswolf 2 AIO - 360mm RTX 3090 Trinity.Morgen, nein, die gibt es nicht mehr und wird auch nicht wieder kommen.
-
Eddy replied to the thread Alphacool NexXxoS XT45 Full Copper 420mm Radiator Plug.You can’t use the V.2 screw plugs with article number 17468 on this radiator. They are only intended for the HPE radiators. For this...
-
Eddy replied to the thread GPU Block Cleaning.That definitely looks like dirt. But at the moment it’s still far from being a serious issue. If you really want to clean it, you could...
-
Eddy replied to the thread Wasserkühler für ASUS ProArt GeForce RTX 4080 SUPER 16GB.Nein, für diese Grafikkarte bieten wir keinen Kühler an. Und wir werden auch keine neuen Kühler mehr für die 4XXX Reihe auf den Markt...
-
Eddy replied to the thread Thermal pad material for 9070 XT waterblocks?.The 1 mm pads are 7 W/mK pads (Rise Ultra Soft: 13012), while the 3 mm pads on the back are 3 W/mK pads. However, the 3 mm pads for the...
-
Eddy replied to the thread Arc B580 Wasserblock - 1/4 Metall Gewinde?.Die sind bei dem Kühler aus Acryl. Das ist das selbe Terminal wie bei allen Eisblock Aurora Kühlern die wir für alle Generationen vor...
-
Eddy replied to the thread 12.7/7.6mm TPV metal fittings, too tight.Strange. Yes, the compression rings are hard to screw on, but normally you shouldn’t really need a tool for that. The only explanation I...
-
Eddy replied to the thread 12.7/7.6mm TPV metal fittings, too tight.By “it looks wrong” I meant the picture where the compression ring is sticking out so far. If all of that is 12.7/7.6 mm TPV tubing, it...
-
Eddy replied to the thread Leak testing Alphacool Core 1 Aurora Black.A leak tester is definitely useful. But yes, if the leak tester itself is the problem, it can be very confusing. In general though, it...