Inno3D GeForce RTX 3080, 10GB GDDR6, iChill Black LHR

[atiss]

Hi,
it seems after almost 4 years the pump has died on Inno3D GeForce RTX 3080, 10GB GDDR6, iChill Black LHR.
I am looking at:
Alphacool Eiswolf 2 AIO - 360mm RTX 3090/3080 with Backplate (Reference)
Article number: 11931
but it states that it is for:
Inno3D GEFORCE RTX 3080 12GB ICHILL BLACK LHR
but I have:
Inno3D GeForce RTX 3080, 10GB GDDR6, iChill Black LHR
Could someone confirm that Alphacool Eiswolf 2 AIO - 360mm RTX 3090/3080 will fit 10GB version?
Also I read this article https://forum.alphacool.com/threads/i-fixed-my-eiswolf-2-rtx-3080-high-vram-temps.4189/ about high VRAM temps and how to fix them from 3 years ago, is it fixed now? or I have to order thicker pads also sperete?

Thanks!

 

[Eddy]

All Inno3D RTX 3080-series graphics cards use the same reference-layout PCB, so there are no relevant differences.

However, we have not offered water blocks for these graphics cards for a long time, and we no longer have any stock available. They are completely sold out. None of the blocks still available in our shop will fit your graphics card.

If only the pump in your Eiswolf has failed, you can simply replace it with another DC-LT pump. I have linked the two available options below.

13289 Alphacool DC-LT 2600 Ultra low noise Ceramic - 12V DC

In der Welt der Wasserkühlung geht es nicht immer nur darum das Maximum an Leistung aus der eigenen Hardware heraus zu holen. Auch die Gesamtlautstärke eines Systems lässt sich mit den richtigen Wasserkühlungskomponenten in den nicht...

shop.alphacool.com

13332 Alphacool DC-LT 2 - 2600rpm Ceramic - 12V DC - (3 Phasen Sinus PCB)

In der Welt der Wasserkühlung geht es nicht immer nur darum das Maximum an Leistung aus der eigenen Hardware heraus zu holen. Auch die Gesamtlautstärke eines Systems lässt sich mit den richtigen Wasserkühlungskomponenten in den nicht...

shop.alphacool.com