Search results

Wenn du einfach den Kreislauf umdrehst, läuft es eben anders herum. Einziger Vorteil, wenn sich etwas vor die Finnen eines Kühlers absetzt, geht es so besser raus. Aber ansonsten hast du keinen Vorteil. EPDM ist steifer, hat aber dennoch engere Biegeradien weil der Schlauch stabiler ist als ein...

Die Anzahl der Kerne ist nicht relevant für einen CPU Kühler. Relevant ist nur die Abwärme und die Anordnung des Chiplayouts. Und da wird sich erst wieder etwas mit AM6 ändern. Nicht bei den CPUs die noch bis dahin kommen werden. Du meinst die VPP655? Separat schon, aber die hat nur theoretisch...

Das war es in der Tat. Wie gesagt, selbst Boards aus der gleichen Reihe, die sich nur farblich unterscheiden, waren nicht miteinander kompatibel. Verstehe das wer will. Auch alle 870 Boards der gleichen Reihe waren nicht mit den 870E Boards der selben Reihe nicht kompatibel. Davon sind wir bei...

Moin, ich rocke? Ich mag Punk Rock, das stimmt. ;-) Ich würde dir vorschlagen mal einen Warenkorb im Shop zusammenzustellen. Einfach alle Teile reinpacken die du gerne hättest. Dann hat man einen Ansatz über den man konkret sprechen kann. Das macht es einfacher dir zu sagen, was vielleicht eine...

Ich sag es mal ganz direkt, der Monoblock wird nicht passen. Wir hatten hier mehr als 40 Mainboards liegen. Nicht ein einziges hat mit einem anderen übereingestimmt. Obwohl wir eigentlich nach der Recherche sicher waren, dass wir einige Monoblöcke für mehrere Boards anbieten können. Aber selbst...

The V.2 radiators are end-of-life, so you won’t be able to find them anymore. Their successors are the HPE models. If those don’t suit your needs, I’m afraid I can’t help you.

That is strange. I cannot see anything in the pictures that would explain why it is leaking. The O-ring is seated correctly, and I cannot see any damage either. Unfortunately, I cannot tell you what might be causing the problem. The only remaining option is to replace the unit. I’m sorry...

Ohne das blanke PCB ohne alle Kühler zu sehen, kann man das gar nicht sagen. Die Layouts sehen immer alle ähnlich aus, sind sie aber in der Regel absolut nicht. Die Boards haben schon unterschiedliche Spannungswandler und auch eine andere Anahl. Montagelöcher sitzen meist auch an...

That is strange. Please remove the water block and take some photos of the PCB with the thermal pads and thermal paste still in place so that we can examine the contact marks. This is usually the best way to identify where the problem may be. The symptoms strongly suggest that the mounting...

Hi, All of these coolers have been end of life for quite some time, and production was discontinued almost two years ago. Unfortunately, you will no longer be able to find them new. Your best chance would be the second-hand market.

Take a look at the bottom of the fitting and you will see the O-ring. It is pre-installed on the fittings. Ideally, the fittings should be screwed in without the compression nut attached. This also makes it easier to check whether they are properly installed. After that, insert the tube and...

Have you tried using different software? We are not listed as compatible with SignalRGB either.

No, why would we have taken photos of them? The fans are not relevant to us. The cards we had here have already been returned to their owners.

Oh, I am the boss? Oh no... better not. When I see that our CEO has to be available day and night, almost every day, and even has to be reachable while on vacation, that would be far too much work for me. To be honest, I never really thought about complete beginners having questions like this...

The problem with forums is that there are some people who really do have very good technical knowledge, but there are simply too many who think they know something, while actually having no idea. And unfortunately, you often cannot clearly tell who actually knows what they are talking about and...

RAM coolers do not have a jetplate, so the flow direction does not matter. All modern GPU and CPU coolers use jetplate systems that require a specific flow direction. A RAM cooler is simply a basic flow-through cooler without a jetplate and only a few coarse fins. The guy from the OCN forum is...

Poorly shown. The pad should actually sit directly on the pins of the connector.

If the tube is cut cleanly and straight, pushed fully onto the fitting, and the union nut is tightened properly, they hold well enough. Yes, you can pull the tube off with a sudden tug, but that is possible with almost all fittings. The pressure inside the loop is a maximum of around 0.4–0.5...

Which Apex fitting exactly is this? To me, it looks a bit like a hard tube fitting, not a soft tube fitting. However, it is difficult to tell from the outside, as they look almost identical externally. Which article number did you purchase, and which exact tubing are you using?

Great, I’m glad we were able to clear that up. Yes, friendliness is of course always appreciated, and a thank you is always nice to receive. I just wanted to make it clear that we always try to answer everything, and that this is what we are here for. We are German, so we tend to be a bit more...