Search results

That does not necessarily mean it is B-stock. It is also possible that this slipped through during production and QC. Of course, that is unfortunate and should not happen, but it does not mean that it is B-stock. If the reservoir had already been used before, you would see various signs of use...

Someone messed up during assembly and attached the cover with IN and OUT the wrong way around. It is a thin aluminum plate that is only glued in the middle. If you carefully go in from the side with a thin knife or something similar, you can simply pry the plate off and turn it around.

Hi, every cooler, every reservoir, and every distro plate has specific IN and OUT ports. Radiators are the only exception, because it does not matter which port the water enters or exits through. With CPU coolers, the water has to enter through the correct port so the cooler can work properly...

Okay, that very clearly explains your problems. With that liquid, you basically destroyed the cooler. You should also urgently disassemble, inspect, and clean your pump, if that is still even possible. With this liquid, you have essentially contaminated your entire cooling loop. You can try...

What kind of coolant did you use? Have you tried soaking the O-rings in diluted citric acid overnight?

No, we do not offer the O-rings separately. With proper use, there is normally never a reason to replace them. Where are you located?

The Apex pump is currently the strongest pump on the market. The VPP655, and Xylem D5 pumps in general, are weaker. If you want more flow, you will not be able to avoid using a second Apex pump. Where you mount the pump does not matter at all. It makes absolutely no difference whether the pump...

However, since your document has already been blocked as a cancellation, it seems you were able to reach us through another channel.

Hi, In general, it would not be a problem to guide you through everything a bit. However, since we no longer offer any coolers for the RTX 3090 Founders Edition, it will be difficult. These coolers are end of life and have been sold out for a long time. We only have a few remaining RTX 3090...

Gefärbtes Acrylglas finde ich furchtbar. ARGB LEDs ja, aber bitte eher nur zum dezentem ausleuchten. Eine Kirmisbude brauche ich nicht.

I’m sorry, but I can’t reveal everything in advance here. You’ll simply have to be patient until the cooler is officially announced. Otherwise, I’d be taking over Marketing’s job. The cooler will be an ES cooler. You can already see the prices of the current ES coolers in our shop, and the...

Ich weiß, das Aquacomputer sagt, dass man die Farben mischen kann. Kann man ja auch. Aber es hat dennoch Nachteile wie man sieht. Ich mache das hier auch schon seit über 11 Jahren und habe schon so einiges gesehen. Ich bin da mittlerweile ganz vorsichtig was Kühlflüssigkeiten betrifft. Denn über...

@GothicIII Das mit dem Ram wusste ich gar nicht. Aber ich bin schon lange aus dem OC Thema raus. Es bringt heute irgendwie nicht mehr so viel und ist auch Aufwendig und ich bin einfach zu Faul um mich damit noch zu beschäftigen. :LOL:

Alle farbigen Flüssigkeiten enthalten Farbpartikel. Pastell war natürlich extrem schlimm, da die dichte der Farbpartikel natürlich enorm hoch war. Ich denke, ohne jetzt die genauen Inhaltsstoffe von DP Ultra zu kennen, dass das Mischen von zwei Farben hier das Hauptproblem ist. Ich weiß was...

Es liegt an deinen Flüssigkeiten. Zum einen sollte man niemals farbige Flüssigkeiten Mischen, das kann immer zu Problemen führen. Egal von welchem Hersteller. Farbige Flüssigkeiten enthalten Farbpartikel aus verschiedenen Stoffen, je nach Farbe. Im Schnellverschluss am O-Ring bzw. im...

Also wenn sich das Rad im Flow-Sensor dreht, aber keine RPM Signale ausgegeben werden, dann wird entweder der Sensor kaputt sein oder das Kabel sitzt nicht richtig am Flow-Sensor. Da würde ich mal schauen, ob z.B. die Pins richtig im Kabel sitzen. Aber ansonsten klingt das leider nach einem...

Are you currently bending everything by hand, or are you using bending tools? For beginners, it is easier to use the appropriate tools, such as bending mandrels/radii, etc. That allows you to work quite accurately. However, you will have a lot of waste if you do not have much practice. Even...

That already looks much better. Unfortunately, the chrome plating will continue to come off. This means you will probably have to do a complete cleaning and refill every year.

I’m afraid I don’t know what a DDC V5.4 is supposed to be. There is only the current 4.2 line from Laing. But yes, there are various DDC variants with different performance levels. However, you would need to make your question more specific and precise. Because I don’t know exactly what you...

@vladomkd The release will probably be at the end of September. All water blocks actively cool the voltage regulators, VRAM, GPU, and several other components. This is actually standard for full-cover water blocks. What made you ask this question?