Search results

  1. Eddy

    Alphacool Leak Testing Tool incl. Pump Question

    Hi, No, that is not necessary. Simply connect the leak tester, pump it up, and wait for about 1 hour. You will see that around 0.1 bar is lost. That is normal, but it should not be more than that. When you are finished and there is no further pressure loss, everything is fine. If you are...
  2. Eddy

    Help Needed: Custom Loop Cooling Plan for Dual Xeon + 4× Tesla V100 32GB PCIe Server

    We do not offer a suitable graphics card cooler for these graphics cards, so I cannot help you with that. For the CPU cooler, you need an “XPX Pro”. Which one you choose does not matter. That is purely a matter of taste, as the differences are basically only visual. When it comes to fittings...
  3. Eddy

    Eiswolf 2 Block Build up

    The coolant remained in the AIO for too long. It needs to be completely drained and flushed. These are no longer just simple deposits; this is already close to the point where the coatings start to get affected. If coolant remains stagnant in an AIO for too long, the fluid can “go bad.” I’m not...
  4. Eddy

    Build advice

    Of course, both configurations are better than 3x 360 mm. They both offer more surface area, and more surface area means better cooling performance. But whether you choose option 1 or 2 doesn’t make much difference in the end. The difference is so marginal that, temperature-wise, it might only...
  5. Eddy

    Help Needed: Custom Loop Cooling Plan for Dual Xeon + 4× Tesla V100 32GB PCIe Server

    @JayBase Please wait until tomorrow. This takes a bit longer to explain everything and i am very busy today. So sorry. Tomorrow i will answere.
  6. Eddy

    Inno3d RTX4090 + 9800X3D in einer custom loop - Neuling

    Der AGB sollte schon mindestens halb voll sein. Wenn du glaubst, dein System ist entlüftet, glaubst du falsch. Es kann Wochen dauern bis auch die letzten Luftblasen aus dem Kreislauf sind. In dieser Zeit kann sich der Wasserpegel merklich weiter senken. Und jedes Jahr sollte man auch einmal den...
  7. Eddy

    Build advice

    It is impossible to give an exact temperature difference or delta value. Just compare it based on the surface area. 2x 420 = 840 x 140 = 117,600 3x 360 = 1080 x 120 = 129,600 With 3x 360 mm radiators, you have almost 10% more surface area. In addition, 420 mm radiators have more dead spots in...
  8. Eddy

    Help Needed: Custom Loop Cooling Plan for Dual Xeon + 4× Tesla V100 32GB PCIe Server

    Basically, I cannot put together a “perfect” system for you, as it is currently not clear what exactly needs to be cooled. You have already selected GPU coolers, and I assume the CPUs should also be cooled. However, it is unclear what should happen with the remaining components, such as hard...
  9. Eddy

    Inno3d RTX4090 + 9800X3D in einer custom loop - Neuling

    Ohne die Pumpe in der Hand zu haben, kann ich dir nicht konkret sagen, was passiert ist. Entweder ist ein normaler Defekt, oder es ist Flüssigkeit in die Pumpe rein gelaufen. Das kann passieren, wenn sie z.B. zu locker montiert wurde oder man den falschen Dichtring verwendet, oder doppelte...
  10. Eddy

    Does Alphacool plan waterblock for AMD AI PRO R9700?

    @darkdisciple Asus is checked, cooler will fit. We had no chance to check XFX.
  11. Eddy

    Order 30217719 changes needed, add more parts

    Write an email asap to info@alphacool.com with your current order number. If possible, they will block your order to make the changes. They will sent you all infos they will need.
  12. Eddy

    Apex CPU Block and Apex Monoblock

    The monoblock for this motherboard will be released. Unfortunately, I can’t tell you when at the moment. Sorry, but I don’t have enough concrete information right now to give you a timeframe.
  13. Eddy

    Additional Order

    Usually, it is still possible to modify an order. However, since your order has already been packed and is on its way, we can no longer make any changes to it. This means that, unfortunately, you will need to place a new regular order.
  14. Eddy

    Inno3d RTX4090 + 9800X3D in einer custom loop - Neuling

    :LOL: Ja, ich weiß was du meinst. Mittlerweile lasse ich alles auf Stock. Gar keine Nerven mehr für solche Sachen. Das ist genauso nervig, wie Windows mit allen Programmen neu zu installieren und alles wieder zu konfigurieren wie man es gerne hätte. Dann viel Glück und Spaß beim Basteln.
  15. Eddy

    Inno3d RTX4090 + 9800X3D in einer custom loop - Neuling

    Ah... ok... ich habe noch die die Abkürzung ALF für die Freezer gesehen. :LOL: Die war mir jetzt ganz neu. Viele Komponenten wie Radiatoren und Anschlüsse kannst du im Grunde ewig weiter verwenden. Die muss man in der Regel nie neu kaufen. Die Teile überleben in der Regel 3-4...
  16. Eddy

    Inno3d RTX4090 + 9800X3D in einer custom loop - Neuling

    Wieso solltest du dir neue Lüfterkaufen müssen für die HPE Radiatoren? Das ist quatsch. Lüfter für Kühler oder Radiatoren würde ich nie extra neu kaufen. Der Performancegewinn ist so marginal, dass er den Aufpreis nicht wert ist. Sofern es überhaupt einen Performancegewinn gibt. Die HPE sind in...
  17. Eddy

    Inno3d RTX4090 + 9800X3D in einer custom loop - Neuling

    Moin, wow, da wurde deine GPU aber mit genug Wärmeleitpaste für 3 Kühler zugeschmiert. Wenn du selbst WLP aufträgst, dann bitte nicht diesem Beispiel folgen. Ich gehe hier mal von oben nach unten auf die Punkte ein. - ARGB haben alle aktuellen Produkte. Für die Controller gibt es ein Standard...
  18. Eddy

    Does Alphacool plan waterblock for AMD AI PRO R9700?

    @Pushbutton The PowerColor and Sapphire cards will definitely fit. We will also physically test the Asus card shortly. At first glance, it looks very promising that the cooler will fit there as well. We will also check Gigabyte. Basically, all PCBs seem to look the same so far, except for one...
  19. Eddy

    Ab wann zweite Pumpe?

    Uff... schreib da mal den Support an. Die O-Ring Maße habe ich nicht im Kopf. Ich habe in 20 Jahren noch nie O-Ringe gewechselt, da noch nie notwendig. Die beiliegenden Dichtungen sind für unten am Gewinde. info@alphacool.com
  20. Eddy

    Ab wann zweite Pumpe?

    @Toohr Vom Eisdeckel ist aktuell keine Core Variante geplant. Da die Nachfrage nach reinen Pumpen Tops kaum vorhanden ist, steht das so ziemlich als letztes auf der Liste der zu erneuernden Produkte. Aber dieses Jahr wird da definitiv nichts mehr kommen. Was für O-Ringe brauchst du? Die...
Back
Top