Search results

Ja, genau so. 4m Schlauch brauchst du nicht. 3m sind mehr als genug.

The height is approximately 25 mm (±1 mm) for both.

Die Lautstärke beider AIOs in Bezug auf die Pumpe ist identisch, da beide die gleiche Pumpe verbaut haben. Die Kühlleistung der Pro Variante ist etwas besser auf den AM5 CPUs. Aber man bewegt sich hier nicht zwischen Welten. Wo der Radiator sitzt, ist bei diesen AIOs eigentlich egal. Besser ist...

Die KI erzählt viel Blödsinn. Ganz besonders, wenn man nicht weiß, wie man ein Promt schreiben muss. Ohne umfangreiches Promt, wirst du nur Blödsinn als Antwort erhalten, ganz besonders zu Wasserkühlung.

This is the manual for the GPU cooler. Here you can find all pads: https://download.alphacool.com/manual/13089_Alphacool_Eisblock_Aurora_Acryl_GPX-N_RTX_3090_TI_FTW3_Ultra_with_Backplate_Manual.pdf And here the manual for the active backplate...

Welche Flüssigkeit du nimmst, ist egal. Ich schätze du stehst zwischen Tec Protect und Apex Liquid. Nimm was du willst. Beim Aufbau des Kreislaufes und dieser CPU mit dieser GPU, würde ich den Radiator zwischen GPU und CPU setzen. Der 9800 X3D ist ein Kühlalptraum mit seinem X3D Cache direkt...

Not too thick, but possibly 2–3 mm too long.

The cooler fits both RAM kits. It does not matter which one you choose. However, the Kingston RAM has better timings. ;)

Our development team is asking for a picture without the thermal pads and a picture of the back side. Apparently, there may also be components there that could be critical. The R10/15 are not relevant; those are coils and are not actively cooled. The monitor connector is also not relevant. The...

Great, thanks for the pictures. The PCB layout looks basically the same. The only thing giving me a bit of a headache right now is a power connector—I can't tell if that's going to be a problem. I'll have to wait and see how things develop.

It would be easier if you could show a picture of the Asus PCB here, as many components are irrelevant for a water cooler. I cannot give you an ETA. We only recently received the Sapphire card, so it will still take some time before the cooler becomes available.

Sure:

I would simply remove the aluminium cooler briefly and take a picture of the PCB. Judging by the outer screws, it could be the same PCB design as Sapphire. But that would probably be the easiest option before sending the card back. Since the cover has already been removed, the warranty is gone...

The Fury Beast series includes several completely different RAM modules with different heatsinks and PCB layouts. Which exact model do you mean? As a general rule, however, you can say that if they have lighting, our coolers will not fit. If they do not have lighting, then the coolers will fit.

@Sephe We are currently working on a Pro 9700 cooler. However, it is not for the Asus version, but for the Sapphire version. We know that there are different PCB layouts. I cannot say which one Asus uses. Unfortunately, your pictures do not help, as we need to see the bare PCB in order to...

You can use one of this pumps. https://shop.alphacool.com/en/shop/pumpen/dc-lt/pum-alphacool-dc-lt-2600-ultra-low-noise-ceramic-12v-dc https://shop.alphacool.com/en/shop/pumpen/dc-lt/pum-alphacool-dc-lt-2-2600rpm-ceramic-12v-dc-3-phase-sine-pcb The DC-LT 2 is a newer version with an improved...

Something similar to what is shown in the picture. I may have expressed myself incorrectly. I did not mean that the pads are caught between the spacers, but rather between the spacers and the PCB. It can easily happen that, when tightening the screws, the pads are compressed and then pushed...

No, that will not work. The PCB layouts of the 3090 and 3090 Ti cards are significantly different. The cooler definitely does not fit your 3090.

If you mixed up IN and OUT, you will lose cooling performance. The pads look good, but is there a pad missing at the very back? Or is it sitting on the GPU? The rear section is also intended to cool the rear voltage converters. Please also check the 4 spacers around the GPU and make sure the...

We have not tested the white version. The PCB number also differs due to the “Q” compared to the black variant, but that could simply be a code for the color. I cannot confirm this without seeing images of the PCB. Based on experience, the probability that the cooler will fit is very high...