Search results

Hi, For this setup, at least 2x 360 mm radiators would be required. However, based on the pictures of the case, I can only see space for one radiator. A second one seems to be indicated, but there are no openings or options to route fittings or tubes past the first radiator. I do not see how...

Wenn du von oben drauf schaust, hast du zwei Anschlüsse am Terminal. Eines ist IN und eines OUT. Und so müssen die auch benutzt werden. IN ist immer der Anschluss, der näher an den Monitoranschlüssen ist. Da muss das Wasser rein fließen. Ob du an dieser Stelle den oberen oder unteren Anschluss...

Sorry, but we do not offer a compatible cooler for this graphics card. We also will not be making one for this graphics card, sorry.

@ju6ge Ich have some pictures from both sides of the PCB, please sent them to info@alphacool.com

Wir können dir das nicht beantworten, da wir die Kompatibilität nicht geprüft haben. Aber die Wahrscheinlichkeit geht gegen 0. Das sehe ich schon an der oberen Kondesatorenreihe. Die sitzen jeweils anders und es sind auch andere Modelle. Damit verschiebt sich auch die Positionierung der...

You need to remove the cover on the terminal. It is only glued on and can be carefully pried off with a fine flat-head screwdriver. You will then be able to access all the necessary screws.

We do not offer a DDC pump with a SATA connector. The reason is simply that some models draw too much power and are therefore not suitable for a SATA connection. Other models use Molex because DDC pumps hardly play a role in the end-customer market anymore, and industrial customers do not want SATA.

I think you may be underestimating the overall stability a little. There used to be spacers that allowed the radiator to be screwed to the wall at four points, also using the standard fan threads. This was sold for almost 15 years, and I’m not aware of a single case where anything tore off...

@BofhKoen Thank you for the pictures. They should be sufficient. I have already forwarded them to our development team so they can check whether the cooler would fit.

You can mount the radiator however you like. The orientation is completely irrelevant for this radiator and any other radiator as well.

@dulouie We have already been able to check some pictures of the Asus card. Unfortunately, they were not ideal for being 100% certain, but it looked like the layout was only minimally different from the ASRock and Sapphire versions. The differences seem to be so small that the cooler would most...

@BofhKoen If you can take pictures of the entire PCB from the top, we can at least check whether the cooler is likely to be compatible. We currently do not have any information about the PowerColor variant. That way, we could at least tell you whether it would be worth waiting for it.

To vám bohužel nemohu potvrdit. Uvádíme pouze kompatibilitu základních desek, které jsme sami otestovali. Zda chladič pasuje i na velmi podobný model, nevíme, protože tuto desku jsme netestovali. Riziko při vyzkoušení je poměrně vysoké, protože u monobloků se vyměňuje také celý kryt I/O panelu...

Currently, the cooler we have in development covers the Sapphire and ASRock variants. The PCBs are basically identical. There is no AMD NDA for the layouts. AMD simply does not distribute samples, which is why websites do not show teardowns.

Es macht ja auch irgendwie Spaß, die Dinger auf und zu zu machen. Ich bin mir sicher, dass ich und meine Kollegen durch die Spielereien damit auch schon ein Dutzend oder mehr Kupplungen zerstört haben, weil wir ständig mit den Mustern herum spielen. Warten lassen kann man die nicht. Der Aufwand...

Hi, selbst warten kann man die nicht. Ja, man kann sie zwar irgendwie zerlegen, aber ob man das dann wieder zusammenbekommt, halte ich für unwahrscheinlich. Die O-Ringe gibt es zudem nicht einzeln bei uns. Ich kann dir spontan nicht mal sagen, was das für O-Ringe genau sind in Bezug auf das Maß...

We do not use any diffusers. There is also likely not enough space to add one afterward. However, if you can find one that is only 1 mm thick, you are welcome to try it and see how it looks.

The only difference between these two hard tubes is the length of the tubes. Nothing else. There are only differences between PETG and PMMA hard tubes.

There are only two possible causes: either the controller is malfunctioning or the LED itself is defective. I would recommend disconnecting all aRGB LEDs first and only connecting the LEDs of the Eiswolf. If the flickering still occurs, the LED strip will need to be replaced. It is glued in...

ChatGPT erzählt viel Blödsinn was Wasserkühlung betrifft. Unglaublich viel gefährlichen Blödsinn. Dann noch viel Spaß.