Search results

Moinsen, leider liegen uns zu dieser Grafikkarte keine Informationen bzgl. des verwendeten PCB Layouts vor. Wenn du uns ein Foto des PCBs schicken könntest, könnten wir prüfen ob evtl. einer unserer Kühler damit kompatibel wäre.

MOinsen, hast du überprüft, ob der Lüfteranschluss auf DC umgestellt ist und mit 12V bzw. 100% betrieben wird?

HI As I can see is only your GPU Temperature very hot. This can be causes because of missing pressure or the well known Package problem. I don´t know the viscosity of your used thermal paste but the paste should be very viscosity like our Sub Zero, which was also included to the water block...

Moinsen, der XT45 180mm Triple Radiator hat ungefähr ein Fassungsvermögen von 570ml der XT45 Nova Radiator hat ungefähr 800ml Volumen.

Moinsen, eine Parallschaltung sollte bei einer Wasserkühlung nicht vorgenommen werden, da Wasser sich immer den Weg des geringsten Widerstandes sucht. Bei der Aktiven BAckplate ist es möglich aufgrund des MCX Verteilers ist der Widerstand und des GPu Kühlers fast identisch. Es sollte jedoch ein...

HI @just_lowrenz I am sorry but we don´t have a compatible water block for this GPU in our assortment.

@Marconquest I am sorry but we don´t have a compatible water block for this GPU in our assortment.

Hi, I am sorry but we don´t have water blocks for any GTX1050 Ti in our assortment.

Hi There, which GPU do you have exactly? We would need the full name or PCB number of your GPU.

Hi There, Could you please tell us your GPU, GPU Hotspot and memory temperature, so that we can check why your GPU is throttling? We don´t offer replacement springs for the screws.

HI, Thank you very much for the photo. Following water block should be compatible with your GPU. https://www.alphacool.com/shop/grafikkarten-wasserkuehler/amd-fullsize/29672/alphacool-eisblock-aurora-acryl-gpx-a-radeon-rx-6700xt-merc-319-mit-backplate

This is really difficult but the easiest way would be to use a small screw driver and pried it open. You can also use two tongs and pull them apart.

Hi, we recommend to run the pump always with 12V. It is possible to run the pump with 7V but this isn´t recommended. It is also not really recommend to run the pump depending on your GPU temperature. If you want to control something depending on your GPU temperature it would be better to...

Hey Bilbo, I am sorry but we don´t have a water block for this GPU in our assortment and as my colleague already told you we won´t produce water blocks for the RX6xxx Series anymore.

Moinsen, die Eisbaer Aurora ist mit dem Sockel 1700 kompatibel. Die aktuelle Anleitung findest du bei uns auf der Produkt Webseite. https://www.alphacool.com/download/manual/11730_Alphacool_Eisbaer_Aurora_360_CPU_-_Digital_RGB_Manual.pdf

This sensor is okay if you use it instead of the screw plug on the fillport. You can also use our Tec Protect 2 to refill the system.

Moinsen, Radiatoren einfach mit destilliertem Wasser spülen. Benutze kein Cilit Bang da dieses das Kupfer angreift und zu dauerhaften Schäden führt.

@molai that is correct. If you want to reuse the quick connection and fittings you would need the TPV Tube and liquids to refill the system. Please also note that you will lose your warranty if you modify your system.

HI the Eisbaer doesn´t read any information like water temperature or water flow. For most flow sensor you would need at least an water flow of 70l/h, which the pump in the Eisbaer doesn´t reach and therefore a flow sensor won´t work. How you have to connect a temperature sensor to the Aquaero I...

Hi As you can check in your system are both pump working against each other.You are going from the IN on the Reservoir to the IN on the Eiswolf!!. Please change the Tubing in your System so that you are going from OUT to IN. The easierst way. As I can see the same case is also in the Eisbaer...