Morgen,
das Diagramm ergibt überhaupt keinen Sinn. Wenn der Kühler nicht richtig sitzen würde, dann hättest du dauerhaft schlechte Temps. Wenn die Pumpe zwischendurch ausfallen würde, kämen auch nicht solche schnellen Peaks zustande. Denn das Wasser nimmt erstmal weiter Wärme auf auch wenn es...
Ich kenne zwar das Problem, dass manche Karten ohne angeschlossene Lüfter dann in der entsprechechenden Software der Karte ein Problem angeben. Aber das mit den Temperaturen ergibt eigentlich keinen Sinn.
Ich würde mal Thundermaster runterschmeißen. Das Tool hilft dir so oder so nicht wirklich...
Where did you mount the radiator? Front? With tubes on the top? If your Mainboard shows a rpm of 2500 the impeller is running well. I think more you have an air bubble inside the pump. That makes always a strange noise.
Sure, no problem. Would be also good to check the rpm in Bios. And check if the fan header is running at full speed. Most mainboards have an automatic regulation on every fan header. But the pump needs to run everytime at full speed.
Ich weiß nicht was das ist, aber Plastikteile sind das nicht. Wie auch immer, schreib uns mal bitte direkt eine mail: info@alphacool.com
Unser Support wird sich darum kümmern.
Ein Bild erklärt oft mehr als tausend Worte. Kannst du mal eines machen bitte und hier posten. Ich bin mir nicht sicher ob ich deiner Beschreibung richtig folgen kann.
Then the air cooler probably has thermal pads on the coils which minimize the vibrations. It is really rare that this helps. We don't put anything on the coils because that can have the opposite effect and make it worse.
We dont have pads on the coils so no, here nothing will really help. There are a few things you can try agains coil whine.
1. Try to fiy your FPS in games with a max setting.
2. Some people douse them with epoxy resin or similar hard non-conductive substances. But of course, this voids the...
First.... never use the thermalpads from the air cooler. They have different sizes. That can`t work at all. ;)
RTX 3XXX GPUs have problems with the package of the DIEs, so sometimes they are higher or lower than normal. We are talking only about 0,5mm but that is enough for some issues...
The nut at the bottom is used solely to hold the mounting bolt with the springs and washers in place for assembly. Theoretically, you can also omit it completely. Otherwise, you should screw it on tightly so that the screw with the washers and spring sit firmly on the holder frame.
And thanks...
Verstehe ich durchaus. Laut aktuellen Gerüchten wird das mit der nächsten Grafikkarten Generation sogar noch schlimmer. Da soll auch die UVP deutlich höher liegen. Fakt ist, nVidia hat über 30% mehr Grafikkarten in diesem Jahr verkauft als im letzten Jahr. Fakt ist auch, die Kühler für die ultra...
Sorry, aber deine Karte wurde von uns nie für eine Kompatiblität überprüft. Daher kann ich hier nur sagen, dass der GPX 2080 M03 nicht passt. Falls du das irgenwdo gelesen haben solltest, hilft nur ausprobieren. Aber bestätigen können wir das nicht. Zumal wir den Kühler auch schon lange nicht...
The Eisbaer Aurora Edition have the same tubes.
Eisbaer Pro Aurora example: https://www.alphacool.com/shop/aios-sets/cpu-aio/27124/alphacool-eisbaer-pro-aurora-360-cpu?c=20540
Eisbaer Aurora example...
The first Edition for the Eiswolf 2 had those tubes and QDCs. That was only for some AMD RX 5XXX and Nvidia 2XXX cards. We dont offer them anymore for the RX 6XXX and RTX 3XXX generation.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.