Search results

I am a marketing guy, so i cant care about the orders, sorry. Please write an email to info@alphacoo.com with our order or customer number, they can cancel your order than you can place a new one.

Do you have any pictures of the PCB design from the Gamerock?

If you are happy with your AIO, you dont need a new one. If you are unhappy with it and if you want to go to a full custom loop, i would also not order the Eisbaer. And yes, i would go for a complete custom loop because you have enough space for it and if optic doesn`t matter... i would choose...

The 3600rpm pump is a industrial pump and i dont think you will like the nouse of it. The pump is very small like a 2€ coin. So the power of this pump cant be very high. An example... in one of my systems i have a Threaripper 1950X and a 2080TI with a 360mm ST30 radiaator. With fans on 1200rpm...

For only a 380FE a 280mm radiator is fine. First question.... is the optic important for you? Because i am personally a big fan of our TPV tubee we are using in our Enterprise systems. Or do you prefere clear tubes? And how much space do you have for the reservoir. Do you want a tube reservoir...

CPU and GPU cooler and one radiator... yes, that will work with the DC-LT 2 pump. DC-LT 2 ist the newer revision of the DC-LT pump. Better electronic, less noise but very similar power.

Good morning, Eiswolf 2 for RTX 3XXX cards will be available in february 2021. If you want to use a DIY setup, you need this cooler for the RTX 3080FE...

You want to cool CPU and GPU with only a 240mm radiator? If you dont care about noise and if you are going to use high pressure fans with 2000rpm, it will works. But with low rpm fans, its not really possible. I saw a lof of SFF case users with a similar configuration and all of them have...

Nahekommen oder ähnlich sein, reicht leider überhaupt nicht. Es reicht, wenn ein Bauteil anders ist, dann passt der Kühler nicht mehr auf die Karte. Da deine PCB Nummer auch von den anderen Modelle abweicht. Wenn das Bild das PCB der Karte ist, dann haben wir keinen Kühler der passt. Das PCB...

Wenn auf dem PCIe Anschluss direkt nVidia steht, kann man in der Tat davon ausgehen, dass es das Reference Design ist. Zumindest wäre mir hier keine andere Version bekannt. Aber die Aussage ist mit Vorsicht zu genießen da wir die Karte nie hier hatten um sie uns anzuschauen. Aber Inno3D...

Eiswolf 2 for RTX 3XXX cards will be available in february 2021. Not earlier.

Hard to give here an answere because it depends on the fans and the temperatures you like to get. With a 4000rpm industrial fan, you can handle around 250W with the 92mm radaitor, with a 1000rpm fan for acceptable temperatures.

My fault, right, there is only the PWM splitter inside the package. Daisy Chane the aRGB cables of the fans so you need at the end only a Y-splitter like i linked it in my post above.

@korefuji Double post... no problem. About your shipping, please ask the support team directly: info@alphacool.com I am not able to check orders (i am marketing not support, sorry). Unfortunately, at the moment we have more orders than we currently receive. Therefore, the customers are supplied...

Eiswolf 2 AIOs für die RTX 3XXX und RX 6XXX Karten wird es erst ab Februar 2021 geben. Früher schaffen wir das nicht, wie man ja an den Beständen sieht :-/

Nein, normal ist das wirklich nicht. Aber normal ist auch das Bestellaufkommen nicht. Ich formuliere es mal anders.... wir haben für die RTX 3XXX Kühler (die RX 6XXX noch nicht mal mitgerechnet) mehr Vorbestellungen als wir insgesamt Kühler im gesamnten letzten Jahr für alle Modelle verkauft...

Wenn Ware ankommt, wird sie nach Bestelleingang an die Besteller ausgeliefert. Da wir die höchste Anszahl an Vorbestellungen in unserer gesamten Geschichte haben, zieht sich das aktuell leider immer weiter nach hinten. Wir haben alleine über unseren Shop mehrere hundert Vorbesteller pro Kühler...

We was thinking about it, but to be honest... after we started the production of this cooler :-/ Our Engeneers Sample from nVidia doesn`t had the bracket, was only the pcb. So we didn`t realized that they have a 3-Slot shield.

Hi, you need only this cable: https://www.alphacool.com/shop/neue-produkte/24864/alphacool-digital-rgb-led-y-kabel-3-fach-mit-jst-stecker-schwarz-30cm The otherone is for the RGB Eis Matrix controller. You didn`t had a aRGB splitter for the fans in the Eiswolf 2 package?

The pump is running on Level 3, that means with around 3300rpm. That is enough for a complete loop with CPU, GPU coolers and 2-3 radiators. Push and Pull will change the temperatures maybe a bit. 1-2°C... depends on how many waste of heat you have. But it will be not a big step.