Search results

Schick das Bild bitte mal an info@alphacool.com mit der Bitte um klärung. Das sieht für mich aus, als wäre das CKC nicht in Ordnung, aber die Jungs im Support können dir da mehr sagen.

Doracool is a local shop and they are already working on the webpage. Thats the reason why you can`t find the page right now. But you can write them an email: Doracoolteam@gmail.com

Sorry, but that says nothing. Because it depends how you design a block and wich parts you like to cool next to GPU, VRM and RAM. You can creat a block for different PCB desings sometimes but its not always the best solution.

Right side on the top of the page you can switch to english.

You can use a open-end spanner, but i am not sure in the moment wich size you will need. But be carefull, there is a locking ring inside the fitting. Not easy to remove it from the tube. Here you can see the locking ring on the picture...

Naja, wie der Kollege schon sagte, es kann auch sein das es erst heute rausgeht.

Ah... yes.. that part is not available for end customers at the moment, sorry. We sell this only to special Enterprise customers . Think we will have it ready for end customers next year. Not sure when exactly.

Wenn du es über Amazon bestellt hast, wirst du leider direkt über Amazone gehen müssen. Wenn das dort nicht funktionieren sollte, dann per email an info@alphacool.com. Amazon ist da recht Strickt was die Regulierungen betrifft die man befolgen muss.

A 3080 has aroud 350W. Thats a loooot. But if you lower the voltage a bit the card will have less than 300W with only loosing 3-5% performance. There are a few worklogs about that in the internet. Than it could be possible. But to be honest, i personaly would never use only a 120mm radiator with...

What do you mean with "Eislink"? TPV Tubes and a lot of TPV fittings 4 x ES GPU cooler 12 x ES QDCs 1 x 480 mm ST30 NexXxoS radiator 1 x 360 mm SST30 NexXxos radiator What you cant get in the moment are the Eisbaer Pro CPU cooler units with pumps. Release will be next year in February i...

A Monsta radiator makes only sense with Push&Pull and High Speed fans with minimum 2000rpm. Otherwise, it performs worse than thinner radiators due to the higher air resistance. I would not use a 120 mm Monsta to cool down over 300W. Thats not really possible.

Starte eine RMA. Das Verhalten ist ungewöhnlich und sollte so nicht sein.

Das sollte so eigentlich passen. Eigentlich sollte so keine Luft zur Pumpe gelangen. Also erstmal alles richtig gemacht. Vibriert die Pumpe wenn sie das Geräusch macht? Und wenn ja, nur wenn sie das Geräusch macht?

Wo genau sitzt denn der Radiator? Kann es sein, dass du den unten montiert hast, zumindest lassen das die Biegungen der Schläuche vermuten. Denn der Radiator sollte zumindest teilweise höher als der Kühler positioniert werden.

Yeah, thats maybe a good idea for the next manual update. But will takes month to get new manuals because all Resellers and Distributors have a lot on stock because of marry christmas.

To be honest.... it is not possible to write a manual wich explains everything exactly because it depends also on the rest of the parts you are using. If you would write the perfect manual, it would be like a book with over 100 pages. So the manual would be more expensive than the product...

Unsere Lüfter haben direkt am eigenen Kabel ein Splitter. Da kannst du alle Lüfter zusammenstecken und dann an den Controller anschlißen wenn du möchtest. Der Controller kann leider keine einzelne Lüfter ansteuern wenn du zum Beispiel 4 Lüfter separat an den Controller anschließt. Die werden...

I have change the article textes right now. For the pics we will need more time but it is on the To-Do of our graphics team. Sorry for this confusion.

We have changed the cooler bottom because copper can tarnish over time and then look unattractive. The nickel plating protects the copper cooler bottom from visual damage. But it does not change the cooling performance. We just haven't changed the pictures in the shop yet, but we will. I'm...

Your mainboard uses 4-pin PWM connectors for everything. You can also put the 3-pin connector on it, that's no problem. If you set the connector in the bios to PWM, the pump gets 12V permanently, if you set it to DC, you can regulate the voltage. This also applies to fans. 3-pin fans cannot be...