Search results

Hi Eddy, I have: 2x VPP655 pumps in "Alphacool Eisdecke D5 Dual Brass Top" 1x Alphacool Monsta 420 radiator mounted in front of case with 3x push Noctua NF-14 and 3x pull NF-14 1x Alphacool 280 ST30 radiator mounted top of case with 2x push NF-14 fans CPU block TechN AM4 GPU block Gigabyte...

Hi, I am wondering what are expected GPU temps with a waterblock on Gigabyte RTX 5070Ti/5080 cards? I am getting around 62C in Furmark and 50C on memory after a 10min run, where water is around 37C (i keep fans low for noise). I have just stock 300W BIOS on it, looking for experience as others...

So, some possible good news. I made the beast work again :) . I covered the holes with kapton tape to isolate the offending screw hole and also remaining 3 to level out the core mounting pressure: The detail: I have also raised the block from board about 0.3mm, in my case this was perfect...

Let me retract my compatibility statement, a bit. Seems that Gigabyte in their infinite wisdom decided to put two signal traces under one of the standoffs, so if you screw the block down it will short out those signals and GPU will not detect. At least in my case, I have first thought it was due...

Hi, well yours looks like mine, Gigabyte RTX 5070Ti Windforce OC SFF. The 10290 block fits but i might need to shim the standoffs as there is too big of a gap - core sits quite high. I already sent inquiry to alphacool, will see. But block itself actually has milled space for the caps, see...