Alphacool Eisbecher Lite 250mm Plexi reservoir

[wolfman13]

Hello , i have this reservoir
what are my options for a pump ?

Alphacool Eisbecher Lite 250mm Plexi reservoir

Alphacool Eisbecher Lite 250mm Plexi Ausgleichsbehälter

Ein Rohr neu erfunden Die Eisbecher Serie besteht aus 20 verschiedenen Ausgleichsbehältern die sich in der Art der Anwendung, der Größe und am Äußeren unterscheiden. Unter diesen gibt es zehn Ausgleichsbehälter die zu 99% aus...

www.alphacool.com

 

[Eddy]

That is a stand alone reservoir without any options for a pump mounting. If you want a reservoir where you can mount a pump, you need an Eisbecher D5 or DDC depends on the pump you have. Wich pump are you like to use?

 

[wolfman13]

I have no idea , currently i have 2 radiators 360 and 240 and a combo cpu/ pump (Eisbaer LT solo ) ,so i was thinking to add an pump also in the system for a better water flow.

 

[Metropolis34]

You need to add a pump to the system buddy this is by far too much for it. If you add the GPU block i dont think that it can handle the loop.

 

[Eddy]

Oh yes.... that a bit too much for the Eisbaer pump.

So you would need something like that:
Pump Top for D5/VPP pumps: https://www.alphacool.com/shop/pump...-g1/4-vpp755/vpp655/tpp644/mcp655-v.3?c=20568

And a pump like this one: https://www.alphacool.com/shop/pump...ol-eispumpe-vpp755-single-edition-v.3?c=20558

But it is very important, that the reservoir is in the case on a higher position than the Pump/pumptop and it is important that the water flows automatically to the pump because the water cooling pumps cannot suck in water.

I would prefere to change the reservoir against something like that: https://www.alphacool.com/shop/ausg...acetal-inkl.-1x-alphacool-eispumpe-vpp755-v.3

 

[wolfman13]

Ok , thanks alot for the help , maybe i will go for the seperate Pump Top and pump than the combo reservoir. My reservoir is like a few months old, totaly new.