Alphacool Eiswolf 2 in combination with EISWAND 360

[Indexor]

Hi,

Alphacool Eiswolf 2 GPU cooler is in place. I want to include my LGA1200 Socket in the loop combing it with the Eiswand.

As far as I understood Eiswolf is 1/4 and Eiswand includes 11/8mm material. If I interpret the manual right the connection to the Eiswand cooler itself is 1/4.

What is the easiest way to connect both?

Buy Eiswand Solo and then work with the Alphacool Eisbaer TPV Extension Set ? can that with an help of an adpater connect directly to one of the the CPU LGA1200 Socket coolers?

Thanks in advance - best case build me a shopping list - love the Eiswolf 2 fast 1/4 connectors

Guess and easy question for you guys.

 

[Eddy]

G1/4 is the thread size of the fittings, which is the same for all products. 11/8 is the hose size, meaning 11mm outer diameter and 8mm inner diameter. The hose size does indeed vary here. However, you can connect everything using the quick disconnects. The quick disconnects from the extension sets are also compatible with each other, even if they look different. So, I see no problems with your project, except that you need to pay attention to the hose lengths. Of course, I can't estimate that.

 

[Indexor]

Hello Eddy,

thanks for your message.

To summarize I can buy the Alphacool Eiswand 360 CPU package https://shop.alphacool.com/en/shop/...lphacool-eiswand-360-cpu-black?number=1013154. LGA 1200 should fit as well.

And connect this adapters that come with the Eiswand package with my existing Eiswolf connectors.

Any troubles with having a third pump within the Eiswolf? They can run all together right?

Is that correct?

Kind Regards

 

[Eddy]

There will be no problem with the three pumps. They are all the same pumps.
And yes, everything is assembled exactly as you describe. There shouldn't be any problems as long as you pay attention to the alignment of the quick-release fasteners.

 

[Indexor]

Perfect Eddy thank you so much!