Alphacool NexXxoS XT45 Full Copper 360mm Radiator V.2 Core thickness

Luckystricker

Official Alphacool Staff
Staff member
Hi @Petrolhead

Do you mean the pure cooling fin strength by the core?
The total height is 45mm. The cooling fins are countersunk by 5mm on both sides. Then you have a pure cooling fins / channels of 35mm. This is on the one hand for a distance between the fan and the fins that the air is distributed better and on the other hand for protection for the fins and cooling ducts when the fan is screwed on. If you have 25mm thick fans you can use the 30mm screws, which is enough for a thin mounting plate in the case. If the sheet metal is thicker or if you use thin shrouds, you take the 35mm screws, of course only if the 30 is no longer enough.


Best Regards
 
Top