Dual Pump/reservoir combo in series

[Superlp12]

Hi, I am current using a single Eisbecher 150 (vpp 755)aurora pushing a cpu block, a gpu block with active backplate, 2 x UT60 480, 1 Monsta 360 and 1 Ut60 360. I have abolutely no issue with flow rate and temperature. how and what would be the impact if I were to add another similar pump/reservoir in series?

 

[Luckystricker]

Hi @Superlp12

That would increase the flow rate, and the temperatures could also drop a little. As far as I know, a second pump brings more power if it is not directly behind the first but several other components are installed in between.

Best Regards

 

[Superlp12]

Actually I plan to get the 250mm version of the reservoir and install it next to the existing reservoir. That would mean minimum changes to how the tube layout looks. Loop order is in this way- first reservoir to second reservoir to gpu to gpu backplate to cpu to inner top radiator(hidden in the picture) to inner front radiator to outer front radiator to outer top radiator(monsta 360) to return to first reservoir

 

[Luckystricker]

Hey @Superlp12

Of course, that works without any problems.

Best Regards

 

[Superlp12]

Hey @Superlp12

Of course, that works without any problems.

Best Regards

Great to know for sure. This will also serve the purpose of filling up the emptiness around area next to my current reservoir and provide redundancy in case one pump died.

 

[Luckystricker]

Correct