the problem is overheating
my system is ryzen 5900x and eisbaer aurora 420 rgb.
at the beginning I didn't notice, but my CPU temperature in the bios is 65-70 degrees, when booting the PC to the windows desktop 80 degrees, after booting it already dropped to 44-50. I went into the OCCT test and aida reached 95-105 degrees and the PC turned off. I found how to do a long test, lowered the voltage and frequency of the ryzen 5900x core to 4000 mhz, temperatures dropped to 88-90 dropped during a long test. and the eisbaer heating was only at one corner of the radiator where the eisbaer quick connect everything else is cold.
What I did:
1. I changed the thermal paste more than once, it didn't help
2. I cleaned the radiator from dust, it didn't help
3. I checked the pump is spinning, yes it works.
4. they advised me to clean and change the liquid, I did everything.
5. after that, the water does not seem to leave the water block, the pump turns, the processor overheats in 30 seconds, the water in the water block heats up.
is there a problem with a fast connection?
my system is ryzen 5900x and eisbaer aurora 420 rgb.
at the beginning I didn't notice, but my CPU temperature in the bios is 65-70 degrees, when booting the PC to the windows desktop 80 degrees, after booting it already dropped to 44-50. I went into the OCCT test and aida reached 95-105 degrees and the PC turned off. I found how to do a long test, lowered the voltage and frequency of the ryzen 5900x core to 4000 mhz, temperatures dropped to 88-90 dropped during a long test. and the eisbaer heating was only at one corner of the radiator where the eisbaer quick connect everything else is cold.
What I did:
1. I changed the thermal paste more than once, it didn't help
2. I cleaned the radiator from dust, it didn't help
3. I checked the pump is spinning, yes it works.
4. they advised me to clean and change the liquid, I did everything.
5. after that, the water does not seem to leave the water block, the pump turns, the processor overheats in 30 seconds, the water in the water block heats up.
is there a problem with a fast connection?