Eisbaer expansion

C

CalR8

New member
I'm currently using my Eisbaer to run a loop which includes both my CPU (3600x) and GPU (3060ti). The loop also includes a 240mm radiator.
Cooling is okay given the circumstances, but I'd like to add a 120mm rad between the CPU and GPU as currently there's nothing between the two for additional cooling.
Would this be too much for the Eisbaer to cope with??
Current loop = Eisbaer on CPU -> GPU block -> 240mm rad -> back to CPU
New loop = Eisbaer on CPU -> 120mm rad -> GPU block -> 240mm rad -> back to CPU
 
Eddy

Eddy

Iceman
Staff member
Sorry, but i cant recommend that with only one DC-LT pump. That is too much restriction for this small pump. You will need a second DC-LT or a stronger pump like DDC or VPP/D5.
And it makes no real sense to put a radiator between a CPU and GPU. The water temperature is relatively constant throughout the entire circuit. Only a few centimeters after a cooler is the water warmer, but that basically does not matter and hardly changes the cooling performance.
 
You must log in or register to reply here.
Top