Shinigamius
New member
Hi, I have recently installed Eisblock Aurora Acryl GPX-N RTX 4090 Master (13476) on my Gigabyte 4090 Gaming OC and noticed that one of the memory modules is not fully covered by the water block.
As you can see on the photo, the left side of the memory chip is not fully uncovered by the water block, while right side has some metal hanging over empty space. I'm worried that it can "unsolder" itself over time, causing issues. Should I send this block back via RMA?
Unfortunately, it took me far longer than 14 days to get all the parts required to fill up and test the system, so I'm long past 14 days return period.
As you can see on the photo, the left side of the memory chip is not fully uncovered by the water block, while right side has some metal hanging over empty space. I'm worried that it can "unsolder" itself over time, causing issues. Should I send this block back via RMA?
Unfortunately, it took me far longer than 14 days to get all the parts required to fill up and test the system, so I'm long past 14 days return period.