Eiswolf 2 pump help.

I

issacparker95

New member
New pump, installed, but pump isn’t moving water; pump is showing 2600+ rpm I’ve seen a single bubble wiggle but I’m not sure it’s actually pushing/pulling water. Again this is new. Should I flush the system and refill even though it hasn’t been used but to check bios/ fan curves and get everything functioning smoothly.
 
Vanzin

Vanzin

Support
Staff member
Hi,

when the pump shows a RPM in the BIOS, then is the pump running. Since the water flow of the DC-LT is very low, it isn´t really visible that the liquid is moving.
 
I

issacparker95

New member
Sorry im jsut now seeing this. It is running and functioning as it should. I do have to run the fans fairly high to keep the temp down. Other than that, a new thing occurred today. I run it with white rgb pulse; i noticed when all the rgb is lit it is now faded to a yellow ish color but singly it is nice and white. I put it on a static setting and the white isnt white but the yellowish. Is my strip for the white setting going bad? Other colors illuminate as they should from what ive gone through.
 
You must log in or register to reply here.
Top